Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tube bending info

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

32NB = 42.4mmOD
40NB = 48.3mmOD
1-3/4" dom = 44.45mm

the standard dies are made for NB, but you can get other sizes just more $$$

if you use the 32NB die it will mark and flaten the sides of the tube, but you will have a uniform bend if you use the 40NB die you will kink the tube

you can grind out the edge of the 32NB die to stop it marking, it will also reduce the "crushing" of the tube

hope this helps

Stu
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Just reading through the thread - seems a lot of people confuse Pipe for Tube.
Also seems a lot of people are using Pipe for cages - when I was always taught tube should be used for structural.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Some links with plans for making your own bender
These are a diferent type but I am told address the deforming problems as the use two dies
http://favoriteprojects.com/how_to_buil ... bender.htm
http://www.blindchickenracing.com/tools ... bender.htm

What good is a bender without a tube notcher
http://www.rorty-design.com/content/No. ... _plans.htm

more how to workshop links from Dune-Buggy.com
http://www.dune-buggy.com/buggylinks/Te ... /ShopTips/
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 83 guests