Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

King Pin & Wheel Bearing pre load settings

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 53
Joined: Thu Feb 19, 2004 1:32 pm
Location: Brissie

King Pin & Wheel Bearing pre load settings

Post by mrsgq »

Does anyone know the pre load settings for a GQ ute for King Pin and wheel bearings. Not just to take the play out of it doing an entire replacment!

Any help muchly appreciated
Sugar & Spice and evertything nice,That's what little girls are made of!
Secretary NBS 4x4 Club
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Don`t the 4 bolts and cap under the king pin control the load on
the bearings

And with the wheel bearings do up untill just tight than give the
hub a spin to make sure all is seated than back it off a LITTLE bit ;)
GQ with big nuts
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 94 guests