Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hi all,
i had a high temp reading while climbing some twisting bitumen roads,that high that the car spluttered as i slowly moved it to a safe place on the side of the road. found the radiator bloked with bugs and mud,cleaned all up no temp problems since.but still had engine malfunction alarm up, could not reset by disconecting battery so took to auto electrician,on the way i filled up with diesel and on restarting car alarm was gone,got the auto to check and see what the alarm was anyway and he said it was a code 34 needle lift sensor but does not know what it means.does anyone know what this means. the car is a gu 2.8 turbo diesel.
cheers rob
electric esky,comfy chair if its driving or fishing ill be there
The needle lift sensor is located in number 1 injector. It tells the ecu when no 1 cylinder is firing, by sensing needle lift. Quickest and cheapest option would be finding a 2nd hand injector with this in it. Must be from a 2.8 tho.
