Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

EGT Q's

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 41
Joined: Thu Dec 02, 2004 2:55 pm
Location: Wollongong

EGT Q's

Post by FastEddie »

Done a fair bit of reading about EGT's on outers. When people are talking about running at 500-550 degrees is that an absolute max or is that just the norm where it sits.

I've just bolted up my CT-20 to my 3L and have it running at about 9lb of boost. On the freeway between the Gong and Sh!tney mine sits between 450-500 but climbs above 600 on some of the hill climbs. Is this bad???

I have turned the fuel up a bit but not much and the car isn't blowing any smoke that I can see.

Any advice would be helpfull.
Top
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Post by quick60 »

Depends on the motor, eg: 1HDT runs at 550, but a 1HDFTE runs at 720 (I think they are the right figures ?)
I'm not sure about a 3L, best to check with a deisel tuner.
Damian.

should I swim it first ?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Also depends on where u have the probe..b4 turbo is 200 deg hotter than after..
Top
Posts: 41
Joined: Thu Dec 02, 2004 2:55 pm
Location: Wollongong

Post by FastEddie »

The probe is mounted in the cast dump pipe after the turbo.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 77 guests