Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Leakin axle seal

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Leakin axle seal

Post by 88pajero »

As a result of not extending my diff breathers I have sprung a leak, I imagine its just a seal.
My diff oil is coming out of the little hole in the hub, I presume quite a few others have had this same prob. My question is if it is just a seal what is the easiest way to put a new one in? Or is it a whole new wheel bearing job?
You do not have the required permissions to view the files attached to this post.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

Post by Adomw »

If it's like mine, pull the axel out, and the seal is in the end of the diff housing, pick it out, and install the new one.

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Also check that the oil has not washed the grease out of your axle bearing as this will fail. You can sometimes get grease back into the bearing with a needle point grease gun
J Top
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests