Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1600 twin cam

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 19
Joined: Thu Sep 15, 2005 11:28 am
Location: Minchinbury,nsw

1600 twin cam

Post by sbfoot »

has anyone done a g16b with the gti twin cam head,pistons,but running it with the standard g16b computer?as my vit needs a rebuild and i have the extra parts.was wondering if it was worth it or just do up the standard head(port and polish,maybe mild cam)?
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

The standard head flows better than the GTi head unless you're going to be doing some some pretty serious porting. I would just stick with tidying up what you have unless you are going forced induction then there is some advantage to using the GTi head.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 19
Joined: Thu Sep 15, 2005 11:28 am
Location: Minchinbury,nsw

Post by sbfoot »

Thanks for the info cj
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 82 guests