Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rangie water pump flow

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 243
Joined: Mon Sep 26, 2005 10:19 pm
Location: Nhill vic

Rangie water pump flow

Post by Rangie Thing »

Hi There, just woundering the two small pipes that come out of the water pump which way do they flow both out or one out and one in. Thanks
I might have a flow problem as i have replumbed and now water pump is starting to make sounds. bad one's
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

You must be talking a carby car.
They both go to the heater so one out one in.
Logic suggests that the centre one is in and the outer one is out., as a centrifugal pump will always suck in the middle and push to the outside.
If no heater you should loop one to the other.
regards Philip A
Posts: 243
Joined: Mon Sep 26, 2005 10:19 pm
Location: Nhill vic

Post by Rangie Thing »

Thanks for that as i thought they were the only engine cooling pipes.

yep it is a carby p76 with some rangie bolt on stuff so if i want the heater to work i will have to find somewhere to plumb it or bypass it as you said.

wounder if anybody knows if there is a place on a p76 block to pipe it to as the one near the carby has been remover when carby was upgraded.
rick
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests