Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flushing out cooling system

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

Flushing out cooling system

Post by Snarba »

Hi there, I've just replaced my leaking radiator and while its out I was wondering if I can flush out the rest of the system? Is it safe to put a hose in one of the pipes and flush away? if so should I flush from the top or bottom or both? I just don't want to damage anything in the thermo housing.....thanx
I've got a WEAPON OF MOSS DETRUCTION
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Take the thermo housing off, and remove the thermostat. Then flush away to your hearts content. See if you have a block drain. If so, remove this as well. In fact, remove as many things as possible to completely flush the block. Back flush as well.
Mud makes excellent toothpaste.
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

BundyRumandCoke wrote:Take the thermo housing off, and remove the thermostat. Then flush away to your hearts content. See if you have a block drain. If so, remove this as well. In fact, remove as many things as possible to completely flush the block. Back flush as well.

Also flush the heater core, bot directions, through the heater hoses.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Whilst the thermostat is out throw it away and out in a new one. They are a disposable and important item.

Bazzle
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

bazzle wrote:Whilst the thermostat is out throw it away and out in a new one. They are a disposable and important item.

Bazzle
yep they cost a lot when they stuff up i know my thermostat stuffed up and cost $7000. for a new motor
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

ditto the f*(&ed engine story.

have an ask around and see if you can get some acid flush. you put it in and leave it for a bit, then flush well. it should help to get rid of any scale on the walls of the water galleries.
http://www.populationparty.org.au/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest