Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clutch help needed

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Clutch help needed

Post by benhl »

I am having problems with my clutch. :bad-words: When stopped at lights with clutch depressed or after backing down a long driveway balancing the clutch, i go to select gear or disengage gear and it is really hard to pop out of gear. If i pump the clutch a few times it works fine.

I think it could be the slave cylinder. Master is dry and not droping any fluid. Replaced entire cluths plates etc about 250km ago so its not that. I think it could be loosing pressure at the slave cylinder during long periods of having my foot on clutch. Like a bypass valve or something. Any Help??? :? Has anyone had this before? How do i fix it and what is a slave cylinder for a 94 22r lux worth?? Thanks
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Re: Clutch help needed

Post by Gribble »

benhl wrote:I am having problems with my clutch. :bad-words: When stopped at lights with clutch depressed or after backing down a long driveway balancing the clutch, i go to select gear or disengage gear and it is really hard to pop out of gear. If i pump the clutch a few times it works fine.

I think it could be the slave cylinder. Master is dry and not droping any fluid. Replaced entire cluths plates etc about 250km ago so its not that. I think it could be loosing pressure at the slave cylinder during long periods of having my foot on clutch. Like a bypass valve or something. Any Help??? :? Has anyone had this before? How do i fix it and what is a slave cylinder for a 94 22r lux worth?? Thanks
Make sure its been bled properly first, then pop off the slave's rubber boot to see if any fluid is leaking past the seal.

P.S. The slaves are worth fark all, i bought an almost identical one for my corolla for less than $20.
\m/
Posts: 210
Joined: Mon Jul 18, 2005 7:24 pm
Location: victoria

clutch

Post by chevJ40 »

it will either be the slave cylinger which is a cheap job or the clutch master, if theres no fluid around the slave chec underneath your dash near the top of the pedal and outside on your booster your bound to find something
goodluck

robbo
Posts: 71
Joined: Tue Feb 24, 2004 11:16 am

Post by dandownunder »

You could try flushing the gearbox aswell, I had a similar problem on my lux a while ago, flushed the gearbox and changed the slave cylinder (which i think is around $38) and it made a big difference.
worth a try

cheers
Dan.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests