Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Welding steel wheels

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Welding steel wheels

Post by beebee »

Is it ok to weld steel wheels with a general purpose style rod in a stick welder?
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Can't see why not. What sort of settings/adjustment do you have on your welder? With vertical down I don't see a problem, as long as it's prepped properly. You might have to progressively weld the sections to prevent warpage, depending on the thickness of the rim (the rim shape will add to the rigidity). Are they to street or trail? If trail only then weld away!
Built, not bought.
Top
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Area54 wrote:Can't see why not. What sort of settings/adjustment do you have on your welder? With vertical down I don't see a problem, as long as it's prepped properly. You might have to progressively weld the sections to prevent warpage, depending on the thickness of the rim (the rim shape will add to the rigidity). Are they to street or trail? If trail only then weld away!


You sure you don't mean vertical up :?: :?: :?:

POS has almost convinced me not to weld the rims with a stick welder. He is probably right as they will see road use between home and trail.
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

I don't think it's that expensive per wheel to get them professionally done, especially if the rims will see road use. Heaps of companies are out there.
Built, not bought.
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

Area54 wrote:I don't think it's that expensive per wheel to get them professionally done, especially if the rims will see road use. Heaps of companies are out there.


Humphey got his centres turned around so all the dish was outwards and it only cost about $45 a rim and that was to weld up the old valve hole and re-drill another on the outside.

If you were goin to do it yourself a mig would probly be better than stick.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Welding Steel wheels.

Use low hydrogen electrodes (E4816) if not using mig.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

I have decided not to do the work myself but to get professional help. Thanks everyone for the info and thoughts though.
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests