Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

warn 9000 help

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

warn 9000 help

Post by dansTOYOwagon »

I have searched and searched, and been through the bibles, but can't appear to find my exact problem.

Freind has a warn 9000 that works sometimes, but other times it seams to "free spin".... the motor turns, but not the drum.

The other day we were winding the cable on, and it just started free spinning. Pulled it off, pulled it apart, put it back together... all fine.

On weekend, pulled a car up some rocks, and then once the load was off the cable, it wouldn't wind in, motor was spinning, but not the drum.

What do you think is the prob ?!

Thanks, Dan
Top
Posts: 4
Joined: Tue Feb 24, 2004 1:04 pm

Post by at4wd »

I would be looking closley at your gear selection lever as it sounds to me like it is worn at the bottom end where it inserts into to gear housing and allowing the outer gear ring to disengage.

Stuart
Top
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

Post by dansTOYOwagon »

Okay thanks stuart, I will have a look during the week.

Appreciated, Dan
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests