Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suspension Change
Moderator: -Scott-
Suspension Change
I've been looking at suspension changes for my 99 NL Paj and I'm thinking of going with the Tough Dog foam cells with a 2" lift Cookie Monster seems to like his. Any other thoughts on what they're like? I've also been told that the rear has sagged by about 20mm , car has 165k on the clock, does this sound right? Done some off road and some heavy towing.
Any help would be great
Any help would be great
99NL Paj
suspension changes
DirtyPaj, I've fitted Tough Dog suspension lift to my NL 6 months ago. The rear ended up getting 70cm lift from were it sat before starting. All because the springs had sagged over the years. Took a bit of dicking around to get the front to match the rear. But as u see from the picks sits and rides a lot better.
You do not have the required permissions to view the files attached to this post.
Supercharged '99 NL Pajero
QU Patrol
QU Patrol
What do you intend on using your vehicle for? What sort of constant load is on your vehcile? We all know there are many suspensions available for for these vehicles based on heights and rates. Let us know a few more facts so we can suggest a few options, these options will based on vehicles mass and ultimatley the dynamics produced. Talk soon.
Mostly used for towing a boat, but I manage to get it on the sand quite often and have the occasional play up at Cruiser park. Also planning to take it up to the Cape next year. A fairly good variety of different uses. Currently has Monroe gas shocks which seem to give it a harsh ride unless it has the boat on and is fully loaded up. Even then it is still very firm.
Thanks for the help
Thanks for the help
99NL Paj
I personally would suggest you fit polyairs in the rear along with a decent shockie. From the use you have described it would suit you far better than fitting medium or heavy duty lifted springs and shocks to suit.
You can lift it by pumping the bags up fully (harsh unloaded) or you can level it with the boat on the back by pumping the bags up to the appropriate pressure. We gained 40mm (full 150L tank of fuel, but unloaded) on stock springs by fitting the polyairs, and when loaded its up around 30mm.
Couple this with 265/75/16 and you should be able to tow and tour anywhere you like with ease.
You can lift it by pumping the bags up fully (harsh unloaded) or you can level it with the boat on the back by pumping the bags up to the appropriate pressure. We gained 40mm (full 150L tank of fuel, but unloaded) on stock springs by fitting the polyairs, and when loaded its up around 30mm.
Couple this with 265/75/16 and you should be able to tow and tour anywhere you like with ease.
Polyairs sound good.
If you have standard springs and wish to preload the airbags to produce a 30-40mm lift, then leave your current monroes on there and assess the ride before replacing them. The monroe may have too higher forces for the standard coil but with the added airbag (less friction and added compliancy) may work ok, though I am not a huge fan of the monroe shock it would be worth trying before discarding.
If you feel a new coil is required, there are progressive rate raised coils that will produce a fair ride. EFS has a 170 to 225 lbs/inch & a 205 to 290 lbs/inch coil, the lighter one with polyairs will tackle almost all situations.
If you have standard springs and wish to preload the airbags to produce a 30-40mm lift, then leave your current monroes on there and assess the ride before replacing them. The monroe may have too higher forces for the standard coil but with the added airbag (less friction and added compliancy) may work ok, though I am not a huge fan of the monroe shock it would be worth trying before discarding.
If you feel a new coil is required, there are progressive rate raised coils that will produce a fair ride. EFS has a 170 to 225 lbs/inch & a 205 to 290 lbs/inch coil, the lighter one with polyairs will tackle almost all situations.
Who is online
Users browsing this forum: No registered users and 17 guests