just want to know from the WA guy's who is the best people to see that deals in Daihatsu wrecking etc. and who over here deals in Daihatsu genuine parts?
thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
WA / Perth owners
Moderator: Tiny
WA / Perth owners
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
ok, i have found a wrecked 96 model roza down here in Esperance.
i want the first exhaust section from the manifold flange to the end of the cat. the guy wants $100 for it, does that sound ok or a bit rich?
i want the first exhaust section from the manifold flange to the end of the cat. the guy wants $100 for it, does that sound ok or a bit rich?
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
I got one from the manifold (not the manifold just pipe) to the tip for $80, but that was for a rocky. Would have thought roza parts be easier to comeby and therefore cheaper.... having said that, before i got the whole pipe my local muffler shop redid the bit from manifold to muffler box for just under 100 from memory.
60 + Turbo, 33"s :armsup:
havnt been there yet, just wanted to get a cheap 2nd hand original so i can just 'bolt' it on easily myself before i change my rego over. (02 sensor is on manifold, so i dont need to worry about that).murcod wrote:Have you tried an exhaust place? Apart from the flanges and oxy sensor mount it shouldn't be too hard to make one from normal exhaust tubing.
thanks for the replies guy's.
Genuine parts, who does them in Perth? in bundaberg it was the Toyota dealership. time to break out the yellow pages i spose.
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
Gday mate i am not too sure on the cheapest dahatsu wrecker in perth but i know that if there is something you are looking for Daiparts are good. They have helped me out with some obscure bits and deal with new parts and second hand.
Daiparts 08 94434200
393 Scarborough Beach Road Osbourne Park
Good luck mate let me know if you find any good wreckers around its always good to try a few options before you settle for an offer.
Daiparts 08 94434200
393 Scarborough Beach Road Osbourne Park
Good luck mate let me know if you find any good wreckers around its always good to try a few options before you settle for an offer.
Who is online
Users browsing this forum: No registered users and 1 guest