Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

PCD of factory GQ rims?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

PCD of factory GQ rims?

Post by sudso »

Anyone know what the PCD of GQ Nissan factory steel rims are?

Just bought a set of muddies on these rims and I'm wondering what other vehicles they will fit.

cheers
sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

do you really want to know the pcd or are you after offset/backspacing?

japenese 6 stud is 5.5" or 139.7mm PCD

off the top of my head... same as most landrcruisers, hilux, pajero, triton, pathfinder, rodeo

offset is a different story
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

N*A*M wrote:do you really want to know the pcd or are you after offset/backspacing?

japenese 6 stud is 5.5" or 139.7mm PCD

off the top of my head... same as most landrcruisers, hilux, pajero, triton, pathfinder, rodeo

offset is a different story
yep, the PCD is what I was after, Thanks
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest