Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sill slider/rock slider
Moderators: toaddog, Elmo, DUDELUX
sill slider/rock slider
making my own sliders and was wondering whats the best way to attach to the chasis so it is strong enough to use hi-lift jack on..thanks
There's a couple of pics of mine in here http://www.outerlimits4x4.com/PHP_Modul ... c&start=60
75x50mm box section with 43mm (from memory) tube to the chassis, fish plated onto the rails.
If you want some pics of the mounts let me know and i'll post them up.
75x50mm box section with 43mm (from memory) tube to the chassis, fish plated onto the rails.
If you want some pics of the mounts let me know and i'll post them up.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
heres some info...
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=41441
scroll down and youll see i changed the mounting, ive come down hard on these quite a bit since i made them and apart from less paint they are holding up well, you can jack up off them as well if need be.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=41441
scroll down and youll see i changed the mounting, ive come down hard on these quite a bit since i made them and apart from less paint they are holding up well, you can jack up off them as well if need be.
Yurich Design Services
www.yds.net.au
www.yds.net.au
Twisted by Design
Twisted by Design
That would depend on how much air you pumped into them.jugger wrote:whats with the little what looks like threaded bits . are u running them as an air tank aswell good idea but how safe.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
i was thinkn more of over time and i spouse if u made them out of thick wall it shouldnt be a problem.sierrajim wrote:That would depend on how much air you pumped into them.jugger wrote:whats with the little what looks like threaded bits . are u running them as an air tank aswell good idea but how safe.
ya got2 b tuff if u gunna b dumb!!
So long as you include a water drain on them or a water trap after the outlet but before any tools , air lockers or anything else you run off them, you shoud have no problem using them as air tanks so long as your happy with the welding that has been done.
95 Surf 3.0l Turbo 2"lift, ARB bar+winch+Rear Locker
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
Who is online
Users browsing this forum: No registered users and 141 guests