Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

v8 GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 21
Joined: Tue Aug 16, 2005 3:54 pm
Location: Sydney, Australia

v8 GQ

Post by picko »

Hi guys,

Just firstly i want to say nissan's RULE!

Prestently I own a 96 model jeep grand cherokee i know i know not the best thing in the world! great engine though straight six!

Well ive got this idea off buying SWB GQ and modifying it!

What i want to do is put my holden 5L engine into it. Its manual 5 speed with aftermarket EMS and MSD and was wondering could it be done. I will be doing it myself!

Are there any problems i should be aware off?

Any help would be appreciated!

thanks guys!
Ben.
:)
Ben.
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

id say it can be done but , id just use a nissan 5 speed gear box because it already has the transfer case on it and it can hack turning big tires
all ya need is a marks adaptor to bolt it to the back of the motor and have it engineered?????? but thats just me

i was looking at using the 6.5 chevy diesil v8 in the GQ lwb same what my old man runs in his 80 series
1995 land rover disco on 265 muddies
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

anything can be done at the right price.

making it legal can be difficult.

what state are you in?
Posts: 232
Joined: Mon Mar 01, 2004 3:42 pm
Location: {Sydney}

Post by greenfourby »

Dellow in sydney make a v8 conversion kit that for my money seems a little more complete than the Mark's one

Also better value for money as it includes a new clutch plate and other bits.

My $0.02
[url]http://www.my4x4.com.au[/url]
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Ryan off this board put a 5 litre into his SWB GQ not long back - maybe PM him ;)
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Post by Camshaft1 »

[quote="bogged"]anything can be done at the right price.

making it legal can be difficult.

what state are you in?[/quote]

If Rod Hadfield can get a spitfire engine registered in a 55 chevy im sure you can organize a 308 into a patrol
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Camshaft1 wrote:
bogged wrote:anything can be done at the right price.

making it legal can be difficult.

what state are you in?
If Rod Hadfield can get a spitfire engine registered in a 55 chevy im sure you can organize a 308 into a patrol
Yes that is true, he also struggles with being allowed to turn it on so he can drive on to the trailer to take it places.
So no drives to the shop for milk in that chevy.

As for V8 into a GQ, many have done. So rego should not be an issue. Also if you need assistance or questions about the install. Anyone with a 308 or 350 should be able to assist. As there about the same size (may even be the same size).
THOUGHT FOR THE DAY....
Posts: 26
Joined: Fri Aug 26, 2005 7:27 pm
Location: SE QLD

Post by Carchania »

gday

just a side note on what turps said about size, 308 is wider, 350 taller
cheers

Leayton
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

pm extraniss hes just put a 5l running wolf ecu and multi coil packs, only consern with the msd is that a slite amount of moisture will cause missfire
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Camshaft1 wrote:If Rod Hadfield can get a spitfire engine registered in a 55 chevy im sure you can organize a 308 into a patrol
have you read the limitations on what he is allowed to do with that? Its basically as turps said, approved to drve onto a trailer not much more.

Shane H off the GQ forum has just refitted a 308 (had one, spun a bearing, then went a V6 commodore as he had the donk sittin there and was short on $, then went with a injected 308 in last few weeks), but now has a Big Block 454 sittin in the driveway, he says its going in the ute, but me has a feelin that the shorty will be gettin it!
Posts: 48
Joined: Wed Jan 14, 2004 11:00 pm
Location: Thomastown, Vic

Post by GQPatrol V8 »

Shane H off the GQ forum has just refitted a 308 (had one, spun a bearing, then went a V6 commodore as he had the donk sittin there and was short on $, then went with a injected 308 in last few weeks), but now has a Big Block 454 sittin in the driveway, he says its going in the ute, but me has a feelin that the shorty will be gettin it![/quote]


Whilst I am tempted to whack in the 96 model 454 Vortec engine into the GQ I will resist at this point. The 5.0 litre is back in and running.

Shane

:finger: :finger: :finger:
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

GQPatrol V8 wrote:
Shane H off the GQ forum has just refitted a 308 (had one, spun a bearing, then went a V6 commodore as he had the donk sittin there and was short on $, then went with a injected 308 in last few weeks), but now has a Big Block 454 sittin in the driveway, he says its going in the ute, but me has a feelin that the shorty will be gettin it!

Whilst I am tempted to whack in the 96 model 454 Vortec engine into the GQ I will resist at this point. The 5.0 litre is back in and running.

Shane

:finger: :finger: :finger:
pussy..
Posts: 65
Joined: Sun Feb 06, 2005 3:52 pm
Location: Melbourne, vic

Post by stuckwithlux »

How do you reckon the fuel economy would differ between the 5.0 and the straight 6 carby nissan motor???
Post Reply

Who is online

Users browsing this forum: No registered users and 111 guests