Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
The GTI conversion, questions I have.....
The GTI conversion, questions I have.....
Hi All,
I am sorry to ask another question concerning the GTI sierra conversion, with most problems sorted out, I was wondering if anyone had attempted to put a MAZDA 323 GTX rotor and dizzy onto the GTI dizzy in order to fit the G13b into the sierra engine bay. This idea was presented on this website http://home.iprimus.com.au/pulsr/g13b/ .
Also does anyone know how to get intouch with the author of this site?
I think he may have some valuable knowledge...
Thanks again,
I am sorry to ask another question concerning the GTI sierra conversion, with most problems sorted out, I was wondering if anyone had attempted to put a MAZDA 323 GTX rotor and dizzy onto the GTI dizzy in order to fit the G13b into the sierra engine bay. This idea was presented on this website http://home.iprimus.com.au/pulsr/g13b/ .
Also does anyone know how to get intouch with the author of this site?
I think he may have some valuable knowledge...
Thanks again,
Try this site link.
http://www.suzisport.com/shop/ . They sell angle drive dizzys for $395
http://www.suzisport.com/shop/ . They sell angle drive dizzys for $395
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
pulsr@iprimus.com.au
that is his email address, it says so on the page. the only other way if the mazda cap dont work is to cut ur fire wall and prob have no heater, or move it. or else u need to get another motor. what year is the gti motor out of? also how many k's?
that is his email address, it says so on the page. the only other way if the mazda cap dont work is to cut ur fire wall and prob have no heater, or move it. or else u need to get another motor. what year is the gti motor out of? also how many k's?
zook comming soon......
try this site http://www.xfaktor.net/
I heard that with a simple swap of the distributor cap with one from a 323 GTX I did not need to deal with the firewall. It was true, the cap solve all firewall issue. But the cap need a little modification, The inside diameter of the 323 GTX cap is a little bit smaller then the GTI. A little of grinding and the cap fitted perfectly .The rotor must be the one from the 323GTX, because the one from the GTI won't fit properly in the 323 GTX cap. To mount the 323 GTX rotor on the GTI shaft, I took the metal part of a GTi rotor and had it modified to fit the inside the 323 GTX rotor.
I heard that with a simple swap of the distributor cap with one from a 323 GTX I did not need to deal with the firewall. It was true, the cap solve all firewall issue. But the cap need a little modification, The inside diameter of the 323 GTX cap is a little bit smaller then the GTI. A little of grinding and the cap fitted perfectly .The rotor must be the one from the 323GTX, because the one from the GTI won't fit properly in the 323 GTX cap. To mount the 323 GTX rotor on the GTI shaft, I took the metal part of a GTi rotor and had it modified to fit the inside the 323 GTX rotor.
P.E.T.A
People eating tasty animals.
People eating tasty animals.
No it fits all G13B's (so Ive been told by suzipsort) I have a kit to install in my 87 engine, so I guess I will find out for sure in the coming months.....przooker wrote:from my understanding the gti angle drive kit fitted g13b twin cam engines from the 1989 - 1996 swifts. and urs is an 1989, so i think it fits, unless its 1990 - 1996.
We have plenty of those 323GTX engines over here, so I should look into it for future engine transplants.
Ive done one already into a SJ410 but got rough and cut a hole in the firewall
Who is online
Users browsing this forum: No registered users and 2 guests