Guys is all that involved in doing a diff swap on a gq a matter of
undo tailshaft
undo brakes
undo upper and lower trailing arm
undo panhard
undo shocks
roll out
then push the new one in and do it all up and bleed brakes.
or am i over simplfing it
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swap out of rear diff
swap out of rear diff
www.mudrhino.com.au
id just put GQ on stands
undo wheel
undo brake sit on top of axle housing
undo drive shaft
drain out oil
undo axle retaing bolts
pull axle righ out other wise sitting it in ther will screw up the oil seal
undo 12 bolt to diff
pull diff chuck away
bring in new
put new gasket on or just gasket goo
put in
do it up same way you undid it
thats for a centers anyways?? unless your replaceing the whole rear differeantal
undo wheel
undo brake sit on top of axle housing
undo drive shaft
drain out oil
undo axle retaing bolts
pull axle righ out other wise sitting it in ther will screw up the oil seal
undo 12 bolt to diff
pull diff chuck away
bring in new
put new gasket on or just gasket goo
put in
do it up same way you undid it
thats for a centers anyways?? unless your replaceing the whole rear differeantal
1995 land rover disco on 265 muddies
yeah looking at full diff swap.matthewK wrote:id just put GQ on stands
undo wheel
undo brake sit on top of axle housing
undo drive shaft
drain out oil
undo axle retaing bolts
pull axle righ out other wise sitting it in ther will screw up the oil seal
undo 12 bolt to diff
pull diff chuck away
bring in new
put new gasket on or just gasket goo
put in
do it up same way you undid it
thats for a centers anyways?? unless your replaceing the whole rear differeantal
www.mudrhino.com.au
Who is online
Users browsing this forum: No registered users and 2 guests