What if the biggest 12v compressor?

[LuxyBoy]

Hi All,

As stated i am wondering which 12v (not engine belt driven) compressor will put out the most air?
The biggest one i have found is the $450 4cfm one from TJM or OnTrack4x4 same thing.
Please give price if you know it or place where i can get a quote.

[droopypete]

http://www.airide.com.au/index.php/cPath/1_5_24
lots of cool stuff here, Glen is good to deal with as well.
Peter.

[LuxyBoy]

I bit pricey
$529.00 for a 3cfm; TJM (aka the rip off bastards) are $450 for a 4cfm

Thanks anyway Pete

[Guy]

I bit pricey
$529.00 for a 3cfm; TJM (aka the rip off bastards) are $450 for a 4cfm

Thanks anyway Pete

Thats for a 100% duty cycle compressor at 150 PSi sounds like a bargin to me compared to the OX's 30% duty cycle

[Doggy]

12 volts......

[Guy]

How about this .. 3cfm compressor 100% duty cycle compressor, tank, pressure cutoff switch etc for $695 ...
http://www.airide.com.au/product_info.p ... cts_id/259

[guzzla]

endless air 8cfm 12v 200psi 16 > 38 psi in 70sec on 35's

[Guy]

endless air 8cfm 12v 200psi 16 > 38 psi in 70sec on 35's

Helpful

[LuxyBoy]

endless air 8cfm 12v 200psi 16 > 38 psi in 70sec on 35's

Bastard

The one at TJM isn't an OX it looks very similiar to the AB-550 VIAIR. They didn't have a spec sheet or anything it was just the sales guy regurgitating the speil 100% duty, 4cfm and so forth.
Does anyone have any concrete info on these? or even know the one i am talking about?
I am juat trying to find the highest volume pump that can handle about 150-200psi and a 100 duty cycle. I already have the tank just need to ram air into it now

[spazbot]

what do you want to do with all that air ?
have you thought about a engine driven pump, more flow etc

[LuxyBoy]

I bit pricey
$529.00 for a 3cfm; TJM (aka the rip off bastards) are $450 for a 4cfm

Thanks anyway Pete

I apologise they sell the one TJM does and they do it for $325
http://www.airide.com.au/product_info.p ... ucts_id/72

Wonder what the difference is?

[BigMav]

I have a huge 12V compressor here at home which was used for airing up heavy machinery tyres. (you know the ones, the tyres are higher than a 4wd.) No idea on the specs of it but it is massive and draws 32amps, requires a big solenoid to run. I'll take some pictures of it later and post here.

[lowlux]

check this one out http://www.oppositelock.com.au/redesign ... ID=RGACHP1

[dirtyGQ]

i have a MAX air and it works great 5 year warantee as well

[bazzle]

Do a search for a "Clisby" air compressor. Used on earth moving and tractors. 12 and 24 volt.

I think Big BAlls sells them too.

Bazzle

[LuxyBoy]

check this one out http://www.oppositelock.com.au/redesign ... ID=RGACHP1

Thats nice 8CFM but $1800 is a bit much for me; thats more than a new locker (that it will eventually run)

[Tiny]

http://www.my4x4.com.au/onlinestore./st ... duct=13142

these are basically the same as a max air, work very well.

for a big CFM one then try www.rtpumps.com aus importer is in seven hills nsw they do various piston and diaphragm pumps for high flow requirments (bear in mind 150psi is low) if they are difficult try www.dynapumps.com.au store in bris perth and syd and they do the RT stuff but the RT stuff wont be cheap

[LuxyBoy]

Thanks guys i will chase around these places