Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H throttle body

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

2H throttle body

Post by Cruzer! »

G'day

I got bored and keen the other day and ripped the head of my 2h for a bit of a clean up (removing sludge) and check over... Took it all to work, cleaned it out nice and proper (it was real crummed up) and it's all shiny aagain. I also did a bit of a port job on the extremely restrictive ports at the valves,and port matched the intake ports, but noticed the 2h throttle body is a very small restrictive unit, was wondering if anybody has modified or played with one in anyway
\
thanks
ben
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

if you get bored again come and do mine :P

ill throw some rings on while you have the head off >_<
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests