Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Group Buy: Suzuki soft top (ute STYLE) EOI

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 19
Joined: Sat Jan 14, 2006 7:28 pm
Location: Gold Coast

Post by Shamus »

The rear seat is a bench seat - fold and roll type. In the pics it's just folded down which does just place it below the body line. Usually I also roll it forward and clip it into place. Maria is intending to make an alternative windjammer which will slope down from the Targa and meet the body further back - not as far as a full fastback top (Maria - by all means correct me if I'm wrong).

The front seats are pushed as far back as the rails will allow. I also drive it with the seats reclined a bit and they do extend beyond the rear of the Targa bar - again another reason for the extended rear windjammer.
Posts: 351
Joined: Fri Aug 13, 2004 9:47 am
Location: Canberra

Post by DiddyZook »

This is looking really good so far. One thing mentioned a few times which has bothered me has been the bleating about needing a big window in the rear. Now that we have a prototype to look at it is easy to see that such a huge window will only make you sweat sitting in such a small cabin where so few people have airconditioning, not to mention the damage clear plastic undergoes on an offroad vehicle.

For the people who have not yet learned how to drive and need to look over their shoulders, they can just remove the back piece until they discover mirrors. And before someone goes off half cocked saying what about their blindspot, stop and think how does anyone drive a truck. Personally I would prefer a small window.

This is just my opinion and no doubt others will disagree.
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

The windjammer will be attached to the tonneau by press studs. I'm already working on the tightenes issue too.

And seats been push all the way back, etc.

When using the tonneau cover do you guys leave the rear seat on the car unfold?

Once I have the original finish I will look on making other options, like one windjammer in an ungle half way to the back of the car. Make tonneau sutible for cars with roll bars.

Thanks every one
Maria

If I have time I will put prices up tonight.
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

I thought on the heat too and I will offer a tinted window that might help this issue.

I will probable be able to offer smaller windows too. I'll think on that while I'm finishing the tonneau this afternoon!!
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 22
Joined: Tue Oct 11, 2005 3:11 pm

Post by martyp »

Maria

Looking good so far!

As for the rear seats, i would have thought most of us pull them out, they're rather usless and very uncomfortable to travel in...

Like the idea of a bit smaller rear window with tint too :D
Posts: 19
Joined: Sat Jan 14, 2006 7:28 pm
Location: Gold Coast

Post by Shamus »

Tinted windows were something I'd thought about and would be a great option.

Seats aren't so useless when you have regular passengers, but I'd agree that most people who use their vehicle extensively off-road probably take them out if they don't need them, if they own rear seats at all. I usually roll them forward when they are not in use. Otherwise they are in the fixed position. I don't leave them the way they are in the photos.
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

yeah my rear seats coming out was the first thing i did... needed the space in the back and they blocked sound from the speakers in the rear door =P

as for learning to drive so you dont need to look over your shoulder - how about learn to drive so you dont damage the area of the car behind the driver's head? lol - if you're damaging that window you're doing something seriously wrong =P

I also like the idea of the tint on that window... very cool idea!

Maria - what is the UV life on the plastic when tinted/untinted? does it change or is it all just 5 years? is there a mirror tint (one way) ?
The worst thing about censorship is ███████.
User avatar
PK
Posts: 266
Joined: Thu Nov 11, 2004 10:35 am

Post by PK »

Looks fantastic!
And I totally disagree about blind spots - mirrors can't cover them all. If you've ever ridden a motorbike on the road, you hate people that don't do head checks.
And suzi's have a bad blind spot over the drivers shoulder.
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

That is looking fantastic. Now im interested in the price.
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

More pics.
I'll ask my supplier about UV life and mirror.
Guys you ask to many questions!
I'll do my best here, hope it helps!
You do not have the required permissions to view the files attached to this post.
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

DiddyZook wrote: For the people who have not yet learned how to drive and need to look over their shoulders, they can just remove the back piece until they discover mirrors. And before someone goes off half cocked saying what about their blindspot, stop and think how does anyone drive a truck.
Not having a go mate...
but we arnt driving trucks, and if theres a safer option out there to do something
i believe most would like to use it..

But each to their own i guess :armsup:
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

Roof cover (bikini) -color/good black $88
- more ordinary black but good $76


Middle cover (windjammer) -color/good black/tinted window $95
-color/good black/clear window $92

*ordinary black but good/tinted window $90
*ordinary black but good/clear window $88


Tonneau cover (duster) -color/good black $98
-ordinary black but good $88

3 pieces Combo in color/good black/tinted window $268
3 pieces Combo in color/good black/clear window $264

3 pieces combo ordinary black/tinted window $242
3 pieces combo ordinary black/clearwindow $238


The ordinary black it has a white backing and for what I have seen around most of the soft tops are made with this material or one preaty much the same.

The color material and the good black (ripstop black) it is much better quality, specialy the black ripstop, but it is more expensive.

OK I hope this will help.

Could I please ask you for any other enquiry could you please write to me at sales@mucanvasproducts.com to make things easier.

Thanks very much for your patience.

Shamus many thanks for letting me your Suzuki! (I haven't finish yet!)
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

blimey thats bloody cheap

maria might wanna find out shipping prices for capitals around aus...
Posts: 427
Joined: Tue Apr 12, 2005 3:02 pm
Location: South of Radelaide

Post by CHOPS1 »

Prices are great! And it looks great, you have done a wonderful job maria and i'm sure you will get alot of business!

chop
I THINK ICAN, I THINK I CAN!
Posts: 2648
Joined: Sun Oct 16, 2005 10:08 pm
Location: Froon's Side

Post by La Fonda »

Maria wrote:I have done this one water repelent as close as it can be
Does this mean the material isn't really water proof?

I am looking at something for a daily driver basis where I can get better viability and loose the feeling os haveing a mass of empty space behing me so how water proof is this tuff?

Also inregards to that Blindspot thing.. having learnt to drive a truck I don't use my blond spots much i prefer a good set of blind spot mirrors so when I tried the blind spot thing tonight.,, I got a fave full of rool bar/targa bar.. I don't think any amount of canvas will change that
The Safest computer in the world is one not connected to the internet. That's why I Highly reccomend Telstra's BigPond.
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

soft top

Post by matsmad »

Are we gonna look at making the standard full soft top at all???
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Posts: 1819
Joined: Wed Jul 21, 2004 1:48 am
Location: Sunny Coast

Post by munecito »

Uh Maria. I want a set. Let me get the bucks and I'll send you a PM.

That is a lovely work!!!!

Will
Diz is a private forum n membership is at da absolute discretion of da Forum Crazy Ass Nigga/Admin
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

The material is 100% water proofed. What happend with soft tops is that they leak, working with soft material you really can not stop the water completely. The leaking can occure around sound bars, around the clamps that hold the bikini straps.

I have push the front seat back as far as they can go and recline them quite a lot, the windajmmer strech back and it works. I'm thinking on adding tonneau material where the seat push agains the window as reinforcement. Just the area that the seat touchs the window.

Don't think I will get on making the full soft top, not for now anyway...

Thanks
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

any chance you think of that zipper idea?
Posts: 22
Joined: Tue Oct 11, 2005 3:11 pm

Post by martyp »

is there any way to attach the bikini top only to the bar (just behind the seats) or do you have to run that strap to the rear of the car?
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

if u dont run the straps back the top will be prone to flapping about... the straps allow you to keep tension in the top =)
The worst thing about censorship is ███████.
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

I'm going to look on making the bikini straples like the TJ jeep once.

Sorry Chunkz I got lost with the zip, what was your idea with the zip?

Maria
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

you know like on suit cases, you zip around it, and the top can pop up...

but i think its more of a dream then anything :P
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

Maria wrote:I'm going to look on making the bikini straples like the TJ jeep once.

Sorry Chunkz I got lost with the zip, what was your idea with the zip?

Maria
I for one prefer the strap style as pictured.
keeps tension better and I think looks better.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

They are looking great!


Is it possible to get a full shot of the car with all three covers on please?
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

nice.... good price too :armsup: i'll definately be up for one, just gotta get my zook repaired and i'll be chasing you up 'bout one!!!! :armsup:
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 101
Joined: Mon Jan 23, 2006 7:08 am
Location: Mt. Tamborine QLD

Post by Maria »

Shipping-postage prices

One or two any of this soft top items:

* anywhere in Australia $10 (Exrpess bag cheaper than normal posting)

*South East QLD $7 Normal posting 2 to 3 days



COMBO 3 pieces set

* Anywhere in Australia overnight $20 (2 Express bags)



COMBO 3 PIECES SET, Normal Postage:

*Perth, NT, Tasmania $17

*Sydney, anywhere NSW, Melbourne, QLD $11

*VIC, SA $15

*QLD South East $7

Maria
mucanvasproducts.com
www.mucanvasproducts.com
www.brisbanejeepclub.com
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Looks real cool. I do have one idea though, I think the Tonneau cover needs some bows/spas/ribs whatever thr correct term is so water dosen't pool then come in where the windjammer attaches and floods the footwell this would be the low point I guess as the tub is level everywhere else.
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Posts: 165
Joined: Tue Oct 12, 2004 8:33 pm
Location: clontarf, qld

Post by inka »

was thinkin the same thing pretty much like the vs onwards commy utes
rockstock gq patrol
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

i was thinking that also - but i was just going to make my own once i got the top... something collapsable and removable (not bolted in).
The worst thing about censorship is ███████.
Post Reply

Who is online

Users browsing this forum: No registered users and 74 guests