Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

removing leafs from spring packs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

removing leafs from spring packs

Post by Ruggers »

where should i remove leafs for better articulation longer top leaves or the shorter bottom leaves. ive taken the 3rd and 4th leaves out and its doesnt seem to have make much difference, the car ia bj73 with a 1hz 2inch in springs and extened shackles and 35's the springs orginally had 8 leafs in them maybe i should take a shorter one as well thanks shrek
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Not too sure about your model but the shorter load bearing leaves are usually the best to junk if you're after some more articulation. Worked for my 40 anyway.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests