I'm not into rockcrawling and want to gear the trukster up for highway use. Will a healthy 6.2 diesel in an FJ60 pull 3.45 (3.54 ?) diffs OK ? I'm aiming at 2000RPM @ 100kph. I'm not sure that 3.7 is tall enough.
I plan on using 4th for towing and at present it's too low, and 5th is weak (so I'm told).
Oh, It's a standard 5-speed with factory rims and 235/85-R16 tyres.
What do I do to recalibrate the speedo ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3.45 with 6.2V8D ?
Moderators: toaddog, Elmo, DUDELUX
3.45 with 6.2V8D ?
Beatle Bayly
Katherine NT
Oztraya
'83 FJ60 GM 6.2Dsl V8
http://photos.yahoo.com/beatle_bayly
Katherine NT
Oztraya
'83 FJ60 GM 6.2Dsl V8
http://photos.yahoo.com/beatle_bayly
Can you buy 3.54 diff crown wheel and pinions? I thought 3.7 was as tall as they go. According to my calculations, with 3.7 gears you would be doing 2040RPM at 100kph in 5th gear. The 3.7 gears were standard in US Spec FJ60's so you should be able to pick them up cheap from there.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Who is online
Users browsing this forum: No registered users and 0 guests