Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Square Blocks

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
Nor
Posts: 44
Joined: Thu Apr 10, 2003 9:41 pm
Location: Lebanon

Square Blocks

Post by Nor »

Hi there guys.

Is there a problem in using square blocks for my body lift?

Thanks.
Best Regards,
Owner & Driver of:
"The Green Youpala,
Official LR recovery Vehicle"
(Patrol GQ 94' LWB, 2" OME Sus Lift,5 link front,35" MT/Rs,Warn M8274-50,Custom Bull Bar,2" BL ---> 4.6 front and rear diffs on the way)
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

No
But should be big enough to cover all of circular mount.

Ensure ones under doors dont impinge on the taper on the inner floor area.

Bazzle
Top
User avatar
Nor
Posts: 44
Joined: Thu Apr 10, 2003 9:41 pm
Location: Lebanon

Square Blocks

Post by Nor »

Thanks for the tip.

The blocks I intend to use are square blocks of 100mm*100mm and 50 mm thick.

What do u think?


I have a LWB, so I'll use 10 blocks
Best Regards,
Owner & Driver of:
"The Green Youpala,
Official LR recovery Vehicle"
(Patrol GQ 94' LWB, 2" OME Sus Lift,5 link front,35" MT/Rs,Warn M8274-50,Custom Bull Bar,2" BL ---> 4.6 front and rear diffs on the way)
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Should be ok.
You will have to relieve them where they touch other bits, ie front valance
and as I said grind a slight taper under floor ones

Bazzle
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

they need to sit flat against the body work, and I think they will be a little big for the job.

Try them, you can always hack them to make fit!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 57 guests