Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2 Alternators or Beef up???

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

2 Alternators or Beef up???

Post by BundyMonkey »

Hi all I am looking at upgrading my alternator amp out put or looking at maybe installing a second alternator to help charge my electrical system as the stocko Toyota one just doesnt cut it.

I am currently running a duel battery system and I dont believe that it is charging it enough. Both batteries are less than 6 months old. The other problem is it is a diesel and has the brake booster pump on the back of it so searching for a bigger amped alternator at the wreckers is extremely difficult.

What are the costs involved in having the alternator beefed up?


Thanks
Before All toys there was the Landcruiser
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I don't know enough about alternators and regulators to be sure, but I suspect that with a standard setup the regulator "sees" the main battery as fully charged, and doesn't charge the second battery very fast. Effectively, your second battery is only ever trickle charged, never "boost" charged.

If you have space, a second alternator may be a better option. Leave the OE setup alone, charging only the starting battery. Add a second alternator to charge your second battery, and hang all your accessories off that. Yes, there's duplication there, but I think that may be the best way to keep both batteries topped up.

Cheers,

Scott
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

agree with Scott, the OE set up has the vac pump so it becomes diffcult to do anything to upgrade the unit. other than that an elec vac pump elswhere and upgrade to a non vac alternator but more to f*** up
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 25
Joined: Tue Feb 01, 2005 1:48 pm

Post by wayne74 »

you should be able to upgrade the alternator you have on there ,theres two ways buy a new one with bigger amps or have the original striped and rebuilt with a bigger rotor ,new rectifier,and coil .but ya might find it would be cheaper to buy a new alternator
Posts: 21
Joined: Thu Nov 10, 2005 8:09 pm
Location: Kingaroy QLD

2nd alt

Post by cathgart »

Hi had the same problem in my 84 lux. I went and got a 85amp commodore alt and made up a coupla brackets and mounted it where the air con is spose to sit. Put another charge light somewhere in the dash to hook it to and you beauty never have to worry about either battery going flat.
Cheers,
Matt
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Yeh you cant just install another alternator and connect the battery charge output to it, you must have the charge light as its not only a warning light, it also supplies voltage to the exciter coils and/or rotor coils which produce the magnetic field.
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

Post by BundyMonkey »

Can you post up a wiring diagram of this set up

Thanks again
Before All toys there was the Landcruiser
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Instead of a light in the dash, You can put in a small resisitor to do the same job. Dont ask me what size as a dont have a clue. Remeber a light globe is essentially a resistor anyway

Cheers
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

pongo wrote:Instead of a light in the dash, You can put in a small resisitor to do the same job. Dont ask me what size as a dont have a clue. Remeber a light globe is essentially a resistor anyway

Cheers
An auto sparky told me to use a 2W globe in a 24V application. Having said that, it still doesn't work. :roll:

Scott
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

NJ SWB wrote:
pongo wrote:Instead of a light in the dash, You can put in a small resisitor to do the same job. Dont ask me what size as a dont have a clue. Remeber a light globe is essentially a resistor anyway

Cheers
An auto sparky told me to use a 2W globe in a 24V application. Having said that, it still doesn't work. :roll:

Scott
That makes sense, as most dash globes are 1.2w, in 12v cars...
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests