This might seem like a strange question but I have an XF falcon paddock basher which needs more traction at the rear end. It currently has 14" rims. Do any 5 stud 15" 4WD rims have the same pattern? I dont want to over capitalise on this car, (it already owes me $360) so was thinking of buying a couple of 2nd hand rims already fitted with tyres from the wreckers if something will fit. I dont mind cutting the guards or bodywork to make something fit.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Are any 4WD rims same stud pattern as a falcon?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Unfortunatly for ya none of these or lada will fit not sure on jeep though.Camshaft1 wrote:Duno mate but the 5 stud options i know of are either rims that fit F100, zook, and rangie or new landcruiser 5 studders. No idea wether they fit or not just that they are 5 stud fourby rims that i can think of.
Cockatoo Canvas
Pvc & Canvas Products
0409 092 741 www.cockatoocanvas.com
Pvc & Canvas Products
0409 092 741 www.cockatoocanvas.com
Whaddaya mean 4X4 rims ? I assume you mean extra wide ?
Later Falcons have 15" dia and AFAIK only the thread on the studs changed since about the XT ?, and possibly the centre hole dia (AU ?). As they are a 6" rim a 225/75-15 tyre should fit
Any welding shop can cut and widen the rims for ya as long as you don't try to rego the car. This is what we used to do on veedubs for beach work.
Later Falcons have 15" dia and AFAIK only the thread on the studs changed since about the XT ?, and possibly the centre hole dia (AU ?). As they are a 6" rim a 225/75-15 tyre should fit
Any welding shop can cut and widen the rims for ya as long as you don't try to rego the car. This is what we used to do on veedubs for beach work.
Beatle Bayly
Katherine NT
Oztraya
'83 FJ60 GM 6.2Dsl V8
http://photos.yahoo.com/beatle_bayly
Katherine NT
Oztraya
'83 FJ60 GM 6.2Dsl V8
http://photos.yahoo.com/beatle_bayly
Doesnt have to be extra wide, was just hoping to go down to the 4x4 wreckers and pickup a couple of cheap 4x4 rims with tyres, anything would be better than 14" road tyres. But I might look at grabbing a couple of 15" falcon rims and fitting some 2nd hand suzuki tyres. Putting them on the front as well would give me a bit more clearnance under the sump as well....beatle_bayly wrote:Whaddaya mean 4X4 rims ? I assume you mean extra wide ?
Later Falcons have 15" dia and AFAIK only the thread on the studs changed since about the XT ?, and possibly the centre hole dia (AU ?). As they are a 6" rim a 225/75-15 tyre should fit
Any welding shop can cut and widen the rims for ya as long as you don't try to rego the car. This is what we used to do on veedubs for beach work.
Good for aerating the lawn as well!BENI81 wrote:Cheap option: Just drill a heap of holes in the tyre, put long bolts through the holes from the inside with big washers, then put a strip of thick strip of rubber over the bolt heads and then tube the tyre. Better than any 4x4 tyre.
Actually it sounded like a silly idea at first but the more I think about it......
I have never actually tried it, but from what I have heard it is grippy as. Can go flat out and just turn.Mark2 wrote:Good for aerating the lawn as well!BENI81 wrote:Cheap option: Just drill a heap of holes in the tyre, put long bolts through the holes from the inside with big washers, then put a strip of thick strip of rubber over the bolt heads and then tube the tyre. Better than any 4x4 tyre.
Actually it sounded like a silly idea at first but the more I think about it......
Yep when i was in the tyre buisness we used to import 14inch muds/snow tyres from germany,very cheap and very strong tyres.Very popular with the subie drivers.Beastmavster wrote:You can buy 14" offroad tyres (for the early subie) and some pretty solid lt type tyres that would be good offroad too....
The only name i can remember is blizzard....size's were somthing like 185/75/14 up to 225/70/14.
PATROL 2007 ST-L 4.8
3inch Lift, 35inch mtz, Rockhoppers
"POWER DEMANDS RESPECT"
3inch Lift, 35inch mtz, Rockhoppers
"POWER DEMANDS RESPECT"
Hmmm........Ice Racing !BENI81 wrote:I have never actually tried it, but from what I have heard it is grippy as. Can go flat out and just turn.Mark2 wrote:Good for aerating the lawn as well!BENI81 wrote:Cheap option: Just drill a heap of holes in the tyre, put long bolts through the holes from the inside with big washers, then put a strip of thick strip of rubber over the bolt heads and then tube the tyre. Better than any 4x4 tyre.
Actually it sounded like a silly idea at first but the more I think about it......
Beatle Bayly
Katherine NT
Oztraya
'83 FJ60 GM 6.2Dsl V8
http://photos.yahoo.com/beatle_bayly
Katherine NT
Oztraya
'83 FJ60 GM 6.2Dsl V8
http://photos.yahoo.com/beatle_bayly
Toyota Dyna 5 stud rims also fit Falcons.
A mate has a Toyota Hilux 2wd ute as an island basher. He needed some more ground clearance. We got a hold of a set of late model 16 inch Falcon rims, and mounted a set of 16 inch 4wd tyres. Do this with either 16's or 15's. Go to Bob Jane TMart, or another decent sized tyre place who sells mags. Chances are they have a huge pile of rims out the back that will be going for scrap, where the owners have changed to mags.
A mate has a Toyota Hilux 2wd ute as an island basher. He needed some more ground clearance. We got a hold of a set of late model 16 inch Falcon rims, and mounted a set of 16 inch 4wd tyres. Do this with either 16's or 15's. Go to Bob Jane TMart, or another decent sized tyre place who sells mags. Chances are they have a huge pile of rims out the back that will be going for scrap, where the owners have changed to mags.
Mud makes excellent toothpaste.
Wheels for falcons are available in 15" and 16" sizes from wreckers.
All you need are a pair of 15x7 rims, and fit some 235/75x15s and you won't even need to do any panel work. This is what I had on my XD, and what my mate now has on his XH ute.
He also has 16x6.5 inch AU Falcon rims on the front fitted with 205x16 tyres.
All you need are a pair of 15x7 rims, and fit some 235/75x15s and you won't even need to do any panel work. This is what I had on my XD, and what my mate now has on his XH ute.
He also has 16x6.5 inch AU Falcon rims on the front fitted with 205x16 tyres.
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
As stated the only common 5*4.5 is newer jeep mid90’s on. all the other 5 stud 4x4 are to wide in the stud holes.
If you can’t get cheap jeep rims/tyres get some 15 ford rims and some 2nd had 4x4 tyers and your set.
The other option is to re-grove your 14 tyres.
Eric
If you can’t get cheap jeep rims/tyres get some 15 ford rims and some 2nd had 4x4 tyers and your set.
The other option is to re-grove your 14 tyres.
Eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
My old XC falcon ran 15x8 falcon rims with 31x10.5 tyres. was hell fun in the mud and went lots of places you just shouldn't take a 2 wheel drive car 
it also had spring over rear. XD front springs(cos there longer than standard XC) and spaced spring mounts in front 
this is not how an XC GXL should be treated
it also had spring over rear. XD front springs(cos there longer than standard XC) and spaced spring mounts in front this is not how an XC GXL should be treated
north tas
Who is online
Users browsing this forum: No registered users and 8 guests