Does anybody know where i can get a 4" lift for my car and how much would it cost? my car is IFS front and coil rear...
Is it worth getting adjustable air suspension? and what are some good brands to look at? and how much would it cost?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux surf lift kit?
Moderators: toaddog, Elmo, DUDELUX
This would be your best bet http://www.toyotasurf.asn.au/forum/index.php
I would imagine you could do a 2" bodylift and then a 2" suspension - replacing your rear springs and winding up your torsion bars.
BUT
you know what you should do dont you!
SAS IT
I would imagine you could do a 2" bodylift and then a 2" suspension - replacing your rear springs and winding up your torsion bars.
BUT
you know what you should do dont you!
SAS IT 
There are heaps of different kits, check the surf site as there is a few posts on it there.
Cheap option is ball joint spacers but this has problems.
several kits available, do a google search.
Pro Comp
Superlift
Calmini
etc
all much the same.
work fantastic just make sure you put in lokkers otherwise you will bust front diffs if you put the matching bigger tyres to the lift.
From memory snake racing had a kit for the front for about $1500 not installed. They are just bolt on kits fairly easy to DIY. Rear just get 80 series springs and make a drop bracket for the panhard rod.
Hope this helps a bit.
Catcha
Cheap option is ball joint spacers but this has problems.
several kits available, do a google search.
Pro Comp
Superlift
Calmini
etc
all much the same.
work fantastic just make sure you put in lokkers otherwise you will bust front diffs if you put the matching bigger tyres to the lift.
From memory snake racing had a kit for the front for about $1500 not installed. They are just bolt on kits fairly easy to DIY. Rear just get 80 series springs and make a drop bracket for the panhard rod.
Hope this helps a bit.
Catcha
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
www.vickrawlers.com
ifs
Just did a 4" pro comp kit from snake racing $1500, went together well only mod needed was to run exhaust over the front shaft. Looks sweet gotta drop my 4" body lift down to 2" but first thing i did was wind torsion bars back down to factory height so it all works well runs 35's no wuckers 
Twisted by Design
My Old runner.....I ran 2" Body, 2" Susp for a while, then went to 3" body to lessen the scrubage.
My current 4runner runs 3" susp (ball joint lift) and 2" body and 33's.
My current 4runner runs 3" susp (ball joint lift) and 2" body and 33's.
You do not have the required permissions to view the files attached to this post.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Who is online
Users browsing this forum: No registered users and 2 guests