Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bitch My Bumper

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Bitch My Bumper

Post by DiscoDino »

Here you go...do not spare it (me):
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Prolly works good but it's fawkin ugly! :finger:
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

more...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

LOL...you're right...it is UGLY...but it works! :D
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

DiscoDino wrote:LOL...you're right...it is UGLY...but it works! :D


As long as you know :D
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

How many 1000 tons is it?
Top
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

Are you using those hitch eyes as recovery points or just for the winch cable?
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

the winch weighs in at 50kg, and the bumper at another 50. With the plastic rope and aluminium fairlead (due in a month), I should gain a couple of degrees more in the approach angle department, and loose 10-12 Kgs.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

The SMBs (Shackle Mounting Brackets) are also used for recovery. At one point this past Saturday I had a dual snatch block rigged on the left one. Each one is rated at 3 tons LIFTING, so I think they'll do the job pretty well. The bolts are grade 8, along with THICK BIG washers and the plate is 8mm. Don't think they're going anywhere.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

Cool, I was just wondering if you had the SMB attached to the chassis somewhere, but that answers my question. Looking at trying to install some on the rear of the TJ so was just wondering how you had it set up.
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

DiscoDino wrote:The SMBs (Shackle Mounting Brackets) are also used for recovery. At one point this past Saturday I had a dual snatch block rigged on the left one. Each one is rated at 3 tons LIFTING, so I think they'll do the job pretty well. The bolts are grade 8, along with THICK BIG washers and the plate is 8mm. Don't think they're going anywhere.


where did u get those bolt on SMBs from???
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

EE (www.expeditionexchange.com) is selling them (look under SMB in their product listing)
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

i don't know about 3 ton lifting.....
the forces involved in kinetic recovery i.e. snatching...would far exceed the 3 ton mark..
high school science :lol: - f (force)=mass x acceleration

that is just opinion... i want something that can handle at least 5 ton to snatch...and will only snatch for light boggings :lol: ... prefer winching... safer and more controlled......



sorry i'm going off topic again :D
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests