Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Its for the 4runner. the wife's away for a couple of weeks so i finnally have a chance to fit it. I only bought it over a year ago of dumbdunce and forgot to ask him.
And does anyone know what size Welch Plugs i need to block the injector holes. Its running straight lpg. I can get it measured, but i figured im here asking anyways
Thanks guys,
Ill let you`s know how i go and if i can a ( yeah right its a 22r) Power increase from it. I assume the Talk ( 22r remeber ) should improve .
Yeah got stuck into it today. The welch plug size for the injectors is 5/8 inch. The throttle cable will fit, But its gunna take some custom fabbing for a braket to hold the end of the cable. I didnt have the half moon bit where the cable attaches to on the butterfly so i used the carby one instead. More issues with that but it was easily overcome. SO anywayz itws definatly doable but there is a bit of rooting around to do.
Yep. Its done and its all good. More responsive and a bit more bottom end. not real sure aboout top end as i was winding it up on the M4 and 1 lane was blocked off due to some FORD driver going through the cable dividers.
and forgot to ask him. 
