Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

drooping to right

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

drooping to right

Post by PJ.zook »

Has anyone had any problems with the sierras leaning to the right (drivers side). Its not a flat tyre or anything as looking at the front the axles are still level, but the body has a pretty noticable lean.
Ive had a bit of a look around and cant see anything.
Could it be springs? Do you just measure them to the chassis to see if they match or...
Im a fat bastard but i didnt think i could bend even a zook lol
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

seach and you shall find
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=44622
[color=green]Vote Earth[/color]
Top
Posts: 1142
Joined: Fri Feb 18, 2005 6:25 pm
Location: brisbane

Post by largesuzy »

the old sierra lean :D search that topic and ull get a heap of results
89 lux 2bl 4inch spring 35's etc still slow as a snail
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Thanks guys
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

I'm not skinny either :)
Plus tank and spare on same side.
Plus torque twist of driveline is on the right too.

I use heavy duty springs on front and back drivers side, and standard on both passenger sides.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Post by Squik »

Don't worry about it, just find a fat passenger :D

Oi!! Where's my sig line got too????? :shock:
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Posts: 2
Joined: Thu Jan 05, 2006 4:16 pm
Location: Melbourne Australia

Post by juneyjuney »

Squik wrote:Don't worry about it, just find a fat passenger :D
But then I'd have to buy HD springs for the other side :D
Good do things come in large packages :D

christover at mums
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Im thinking of getting 2 standard rear springs from Ironman, using them up the front (was going to do this mod anyway) and adding an extra leaf from the old front springs into both the right hand springs. This sound like it will work?
(Yes i know Ironman arent the best but i can get them cheap)
Top
Posts: 427
Joined: Tue Apr 12, 2005 3:02 pm
Location: South of Radelaide

Post by CHOPS1 »

PJ.zook wrote:Im thinking of getting 2 standard rear springs from Ironman, using them up the front (was going to do this mod anyway) and adding an extra leaf from the old front springs into both the right hand springs. This sound like it will work?
(Yes i know Ironman arent the best but i can get them cheap)
be careful with the ironman springs, i had all sorts of troubles with them! Try beltons.

Also most springs are marked for the ones to go on drivers side they have more of an arc to allow for the weight. You can see it when you lay them next to each other. Dont forget that aswell as the spare, fuel tank, driver, the battery aswell is on that side ;)
I also added 15mm extra on front shackle when i made extended ones,to drivers side to compensate for lean.
chop
I THINK ICAN, I THINK I CAN!
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

:D I thought this was a thread about me doing the "time warp" from the Rocky Horror Picture Show :D
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest