Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rust removal in Brisbane?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Rust removal in Brisbane?

Post by LuxyBoy »

Hi All,

I noticed a slight surface rust patch on my left front chassis rail and want to get it fixed quick smart.
Can anyone recommend a good quality and light on the wallet place?
I am near Logan
Kind Regards,
Brad
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

if it is just surface rust fix it yourself.

just need to sand it back prime it (maybe etch primer) and paint it black.
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

rust

Post by LuxyBoy »

Do i need anysort of special paint? What should i ask for?
Kind Regards,
Brad
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

If there is no actual metal(rust) that is flaking off and no pinholes in the chassis, then just sand properly, paint it with a good cold galvanising paint (97% zinc or more), and when that is cured paint it with some chassis black.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

rust

Post by LuxyBoy »

Cheers guys :D
There is no flaking :)
Kind Regards,
Brad
Top
Posts: 236
Joined: Tue Aug 09, 2005 8:24 pm
Location: Brisbane

Post by Rb25sil80 »

How about if there is flaking? Ive got a bit of rust in the A pillar on my Feroza just around the aerial. Its going to need the professional touch I think.

Im in Brisbane as well, anybody got any recommendations?

Cheers
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

Rb25sil80 wrote:Ive got a bit of rust in the A pillar on my Feroza just around the aerial. Its going to need the professional touch I think.

Im in Brisbane as well, anybody got any recommendations?
Grind it, bog it, paint it :D
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

no worries i can do it for you. i will grind it , prep it , rust convert it, finish it too. my shop at logan call me 0438279890
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

giantracing wrote:no worries i can do it for you. i will grind it , prep it , rust convert it, finish it too. my shop at logan call me 0438279890
I've got some coming though the rear windows on the 80. Both sides :? I'll give you a call when I'm back in Brissy.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests