Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
just been muckin round, doin the springs and repainting my rims this morning and measured him up, just thoguth it would be cool to get an idea of the specs on everyones jabbers,
Wheelbase: 240cm / 96"
Width: 186cm / 74.4"
Height: 186cm / 74.4"
i have a square paj the 33" x 12.5" tyres have helped give some extra width and he now stands really well, and these figures ar ewith the GQ rear springs out, and the LWB paj coils in.
Had to measure after the body lift. Almost had a slight mishap at a carpark.
I still fit in most carparks (2.1m). A few that have barriers at 2.0m tho.
Does anyone have the height of a stock NH LWB Pajero? I want to enter Son Of Trials and need to make sure I have less than 4" lift. I'm pretty sure I'm on about 3", but just need to make sure.
well mines lower running 33"s, all you going on about how HIGH they are, id so much rather be closer to the ground, the paj already seems to find the off camber angles way too easily for my liking
the 33" x 12.5" tyres have helped give some extra width and he now stands really well, and these figures ar ewith the GQ rear springs out, and the LWB paj coils in.
im there now, finally, 7-9pm is all i have today 
