Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wheel spacers

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

wheel spacers

Post by TRobbo »

Does anyone in Aus sell these to suit a rover (and yes I know they are not legal for road use)? Snake racing used to have them but dont appear to now.
Warn - Dont leave home without it
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Re: wheel spacers

Post by Maggot4x4 »

TRobbo wrote:Does anyone in Aus sell these to suit a rover (and yes I know they are not legal for road use)? Snake racing used to have them but dont appear to now.
You wouldn't want the snake ones anyway. Any machine shop could make em up for you.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 91
Joined: Sat Jan 22, 2005 4:55 pm
Location: Cairns, FNQ.

Post by 1103.9TD »

Any coments on the ones 'Big Balls 4x4' supply, besides the bl**dy price??.
Top
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

Rovacraft in Perth do rover ones, but Ive heard
there around a $1000.00 for 4, but give them a call
to check. 0893770080
rover money pit on mogs !!!
Top
srw
Posts: 11
Joined: Tue Feb 18, 2003 10:12 am
Location: Boronia, VIC

Contact:
Contact srw

Post by srw »

Yes Rovacraft Do stock the Alloy 35mm spacers around $725 last quote...
Top
Posts: 44
Joined: Wed Jul 07, 2004 9:36 am
Location: Rockhampton

Contact:
Contact CQ Davo

Post by CQ Davo »

I got a set done at a local machine shop. Just took in a spare rim and he did the rest. Cost $100 each then just got the studs and pressed them in myself. That was a 1" steel spacer.
Vice President Cqoffroad.org.au
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests