Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need help PLz Urgent... My Bundera is leaking Diff Oil

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 33
Joined: Fri Jan 28, 2005 7:25 pm

Need help PLz Urgent... My Bundera is leaking Diff Oil

Post by doddyz »

My Bundera has been sold, so any help much appreciated.

I went to have a look under the back of the bundy today, only to discover a lovely lil puddle of oil on the inside of the alloy rim. It is dripping from the drum brakes down on to the inner side of the tyre.

I think my Oil Seal on the axel is cactus.

Would this be the case?

If so where would I get the seals from?
Would anyone have the part number?

I have found out there are three seals.
Inner Seal, O Ring and Outer Seal.

Should I replace all three or just the Inner Seal?

How hard is it to replace? Or roughly how much would it cost to get fixed? and fill the diff with oil again.

The seal is leaking on the drivers side rear diff.

My car is the 22r R70.

Much Much Appreciated.

Cheers. Doddyz
Last edited by doddyz on Sun Mar 12, 2006 4:19 pm, edited 1 time in total.
Top
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

I know this may not help much...but here goes.

I think there is only 1 seal and if its the same (or close enough) to a HJ60 it should be easy enough to change.

You should be able to get the seal from any parts supplier, just whether they have it in stock would be the thing. So I would be heading to a larger parts supplier, might have more luck having one in stock.
L.S Canvas & P.V.C
www.lscanvas.com.au
Top
Posts: 33
Joined: Fri Jan 28, 2005 7:25 pm

Post by doddyz »

Thanks but I need some more info.

PLease Any other help

Much Appreciated.
Top
Posts: 85
Joined: Wed Apr 13, 2005 11:49 pm
Location: Townsville

Post by V6 Bundy »

the inner oil seal is a piece of piss to change - the O ring is in the same position. The outer oil seal is a PITA to do. You need a press to take the axel out.
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

whipe the oil up and let the new owner fix it
www.overkill4x4.com
ph 94766137
Top
Posts: 33
Joined: Fri Jan 28, 2005 7:25 pm

Post by doddyz »

Where do I get the seals from and how much?

Cheers
Top
Posts: 417
Joined: Wed Jul 13, 2005 8:30 pm
Location: NSW

Post by Modified Toy »

Toyota, Repco
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Just had the same prolem. I replaced all 3 parts on both sides of the axle and also the brake pads.

Do it properly!
Top
Posts: 33
Joined: Fri Jan 28, 2005 7:25 pm

Post by doddyz »

Hi I went to Repco and bought the Axle Bearing kit.

The bearing kit is by Maxi Trac. The code is AK1 rr hilux 4wd - 5/98 cost me $56

Hope its the right one.

Is anyone available to help me fit it today in Melbourne in South Eastern Suburbs. I will give you $50 for your time.

Any help much appreciated.

Send me a pm if you might be able to help me today.

Cheers Doddyz
Top
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

Post by BundyMonkey »

Mate you will need a press to get the bearings on and off to minimise your chances of damaging the axel. but you can do it without one it just takes longer. Apart from that its an easy job. I had to do them on a mates truck on the way down to Tuff truck last year in the motel car park :bad-words:
Before All toys there was the Landcruiser
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests