Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What ratio came standard

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 29
Joined: Sun Mar 12, 2006 2:01 pm
Location: Adelaide Sth OZ

What ratio came standard

Post by slingabrad »

The 1988 lwb maverick im wrecking has air lockers and im wanting to sell the centersw with lockers fitted.
What ratio would these be(i havent got them out yet)
4.2 pet 5spd man
Cheers
Brad
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

Mate.

Open your bonnet and have scout around on the firewall - passengers side if I remember correctly. There will be a plate with chassiss number and engine number etc.. Somewhere on it will be HG41 or HG39 - this will indicate the ratio that your truck has from factory.. ie, 4.1 or 3.9.

I will bet $50 you have 4.1's : )
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 29
Joined: Sun Mar 12, 2006 2:01 pm
Location: Adelaide Sth OZ

Post by slingabrad »

thanks mate :P
Posts: 131
Joined: Fri Nov 07, 2003 11:59 am
Location: Fraser Coast Qld

Post by Tailspin »

should have the ratio stamped on the crown wheel mate
Fraser Island tour bus drivers suck!!

www.waterfrontrestaurant.info
www.frasercoast4wdclub.com
www.coastal4x4.com.au
1988 GQ 4.2TD, 2002 GU 3.0TD Wagon, 1987 HJ75 Ute.
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Tailspin wrote:should have the ratio stamped on the crown wheel mate
Unfortunately, the diff housing isn't see-through ... :?
KRiS
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

RoldIT wrote:
Tailspin wrote:should have the ratio stamped on the crown wheel mate
Unfortunately, the diff housing isn't see-through ... :?
:rofl:
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

Mine has 3.9's Good on road with 31's but s#$t with 33's on road worse up hills.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests