Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Shell 100 Extreme fuel

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Shell 100 Extreme fuel

Post by Ian Sharpe »

HAs anyone tried this new fuel from Shell??

Its 100 octane with 5% ethanol.

mitsu say that all their fuel injected petrols can run on ethanol mixed fuel.

The bit that interest me though is the 100 octane.

Not sure if the NL 3.5 would be 'smart' enough to make use of it, as its designed to run on standard 95. But I can notice a small improvement when I run it on premium, so maybe its worth a try>

What do others reckon??
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Posts: 81
Joined: Sun Oct 23, 2005 11:30 am
Location: Sydney

Post by its fishi »

Probably not worth it. You should run any engine on the lowest, yes lowest people, octane rating it's designed for.

Having said that, the 3.5 may have a couple of knock sensors and be smart enough to extarct some more energy from the mix. have to ask a smart person.... :lol:
[color=blue]blue swb gls 3.0 wanker[/color]
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

its fishi wrote:Probably not worth it. You should run any engine on the lowest, yes lowest people, octane rating it's designed for.
How do you come to this conclusion?
Posts: 81
Joined: Sun Oct 23, 2005 11:30 am
Location: Sydney

Post by its fishi »

If you are using a fuel of a higher octane rating than the engine is designed for all you are doing is sending unburnt fuel out the pipe.

Maybe I should have said "you should use the lowest octane rating fuel that will give complete combustion of the fuel/air mix without causing detonation". ;)
[color=blue]blue swb gls 3.0 wanker[/color]
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

its fishi wrote:If you are using a fuel of a higher octane rating than the engine is designed for all you are doing is sending unburnt fuel out the pipe.

Maybe I should have said "you should use the lowest octane rating fuel that will give complete combustion of the fuel/air mix without causing detonation". ;)
Is that before or after I adjust my ignition timing?
Posts: 81
Joined: Sun Oct 23, 2005 11:30 am
Location: Sydney

Post by its fishi »

Scott, notice I used the word "designed" in anticipation of your line of questioning. :D
[color=blue]blue swb gls 3.0 wanker[/color]
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

You're over-simplifying the issue.

Any given engine is tuned to operate with a fuel of a given octane rating. Within limits, you can retune an engine to take advantage of higher octane fuel - typically by advancing the ignition, which generally leads to more power.

Modern engines designed to run on high octane premium fuel will also run on lower octane regular fuel by using a "knock sensor" to detect knocking and retard timing.

So, by your definition, which octane are they "designed" for?

Scott
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Scott, I agree with all you are saying, you can adjust the timing to help adjust to different fuel.

This said also some high performance engines do run better on higher octane due to their high compression ratio and tendancy to pink on lower octane fuel. I had a turbocharged Subaru and it did not like 91 octane, I made sure i didn't give it a bootful with that tank!

Ah the joys of EFI computers a. Our old Mahindra Indian CJ4 Jeep with a F head was degigned to run on 87 octane but it went so much better on 96, less burnt valves, and much less pinking!

Cheers
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

RE:

Post by Grantw »

I run the 100 ron shell in my Evo 8. Doesnt make much diff at all. Not too sure about economy figures because my right foot blows that out the window. Bp 100 is not far off though and will contain 0 % ethanol.
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Posts: 81
Joined: Sun Oct 23, 2005 11:30 am
Location: Sydney

Post by its fishi »

NJ SWB wrote:You're over-simplifying the issue.

Any given engine is tuned to operate with a fuel of a given octane rating. Within limits, you can retune an engine to take advantage of higher octane fuel - typically by advancing the ignition, which generally leads to more power.

Modern engines designed to run on high octane premium fuel will also run on lower octane regular fuel by using a "knock sensor" to detect knocking and retard timing.

So, by your definition, which octane are they "designed" for?

Scott
Using the "its fishi" defiintion of designed, an engine should be tuned to extract maximium power (not economy :D ). This is going to occur with a fuel of a given octane rating. Once you exceed (or reduce) that octane rating power will decrease. This is therefore the octane rating that engine is designed for. ;)
[color=blue]blue swb gls 3.0 wanker[/color]
Posts: 728
Joined: Sun Aug 24, 2003 8:46 pm
Location: Canberra (too far from the sea)

Post by twinnie »

ok in this case "designed for" is about compresion ratios yeah? the higher the compresion ratio the more stable the fuel needs to be so it can be ignited at the right time. the pajero (pick any motor you like) doesn't have very high compresion so it doesn't need 100 octane.

now with grant's evo 8 for instence it will make a difrence (although going from 98 to 100 won't be a big jump) i have seen a test where sevral cars were filled with regular unleaded and put on a dino then put on optimax and dinoed again the result the rover 25 saw no improvement but the wrx sti saw a 15 hp improvement.

Matt
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

Post by Adomw »

Men

I've done some testing on this and on my runns to Perth (1000k round trip) I've found the higher the octain the petrol, the more money I save as the engine becomes more efficient and the higher the price of petrol the more the gap

To put a fine point on it $100 worth of PULP gets me further than $100 worth of ULP

Happily I also get more power to :twisted: to overtake all those diesel slugs

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Post by Ian Sharpe »

Ado,

have you tried the new shell 100 though??
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

Post by Adomw »

Ian

I hasn't appeared out here yet, but I'll give it a shot when it does

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Posts: 123
Joined: Fri Oct 28, 2005 5:49 pm
Location: 44 Million Sheep

Post by Overkill »

I'd check that it's not the same as Avgas, with a mix of lead. If it is, it will eventually block your catalytic converter with tetra-ehtyl lead. Cost lots to replace! Should be allright if you have a straight through pipe, or do a transplant with any heart pre 86, but I'd stick with pulp.
I LIKE IT, I LIKE IT ALOT!!!!!!!!!
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

Overkill wrote:I'd check that it's not the same as Avgas, with a mix of lead. If it is, it will eventually block your catalytic converter with tetra-ehtyl lead. Cost lots to replace! Should be allright if you have a straight through pipe, or do a transplant with any heart pre 86, but I'd stick with pulp.
This fuel does NOT have lead as it is available from the bowser
Reptile fabrication.
www.agroautomotive.net
Posts: 203
Joined: Thu Sep 25, 2003 11:28 pm
Location: Rowville. Melbourne

Post by Allan Mac »

Ian, I have tried all the PULP fuel from the different companies in my NL & TBH is a waste of money. Found BP Ultimate the best, with Optimax the worst. Results were slight improvement in performance, but hardly mind shattering. Economy; maybe an extra 10klm out of a tank. Tests were done on highway & city driving along with 4wding & towing my boat. Now use either the Shell 95 or Caltex Vortex (using discount vouchers). IMO, I wouldn't bother with Shells new stuff.

Cheers
Allan Mac
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Post by Ian Sharpe »

Allan,

Yeah I use vortex myself & found it OK.
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest