Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disassemble the front bumper.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Disassemble the front bumper.

Post by Ippie »

I tried the Vitara Bible but couldn't find any details.

Can anyone tells me how to disassemble the original bumper and putting on a TJM steel bumper?

Million thx.
1996 Vitara 2000cc V6 5drs
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

just crawl underneath. There will be a heap of brackets etc attatched to the bar. Just start undoing them. You will not harm anything by just taking bolts out ;) :D
[url]www.twinstickoffroad.com[/url]
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

But do I need to drill or mod anything to make the TJM T1 bull bar on?
:?:
1996 Vitara 2000cc V6 5drs
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

you shouldnt have to. you will find out when you go to fit the bar. if no holes line up. then that probably means you have to drill them yourself. either way its no biggy. unless you dont own a drill. so borrow one. if you cant operate a drill then maybe you should be paying someone else to fit your bullbar.
[url]http://www.vic.suzuki4wd.com/forum[/url]
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

if the var is to suit your type of vehicle and year model, then it should have all necessary brackets and hardware to fit it without modification to your car.
[url]www.twinstickoffroad.com[/url]
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Actually, I had found the TJM T1 bull bar at a yard where export the old cars to Africa.
I called and asked if I could trade in my existing bumper with his TJM T1 and the aerorack.
He said how much I would offer him.
I tried AU$380 and it was a deal!

So, we are going to exchange to bumper at the spot.
There's why I want to know how to install it.
I guess we just change the bumper and the brackets which are needed.
Hopefully, it would turn out OK.
:twisted:
1996 Vitara 2000cc V6 5drs
Top
Posts: 292
Joined: Mon Jan 20, 2003 5:43 pm
Location: Liverpool NSW

Post by Charlie »

TJM sell the ECB bars www.ecb.com.au/model/Vitara.htm so it might bolt straight on,remembering of course our V6s are wider than a 4.

Regards Charlie
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

If it's of another V6 you should be fine.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Yes! It's of another 5 dr Vitara.
But not sure what year.
I hope it would fit allright...
Wish me luck!
:D
1996 Vitara 2000cc V6 5drs
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Got the TJM T1 bumper fitted this morning!
4 bolts to get the original off.
4 bolts to get the 2nd hand one on!
Wa la!
:twisted:
1996 Vitara 2000cc V6 5drs
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Transformed!
:P
You do not have the required permissions to view the files attached to this post.
1996 Vitara 2000cc V6 5drs
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 2 guests