Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco tray back

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
tim
Posts: 47
Joined: Tue Apr 06, 2004 11:14 pm
Location: UK

Disco tray back

Post by tim »

Just a few pics of a Disco tray back we are putting together.

Panels are GRP with an inner layer of woven carbon / kevlar for strength and to reduce the risk of penetration if (when!) it gets rolled.

There are welded in steel pieces internally to restore the integrity of the bodyshell.

On 35" ET2's and a 2" lift it is about 5.5" lower than a standard Disco. And a fair bit lighter!

Image

Image

Image

Image

Sorry about the poor quality pics.

Tim

PS the diagonals are just tacked in to brace the body during the build.
Life's too short for a full time job
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

It should be a nice truck. The roof makes a lot of difference to the appearance (much like those from Les Richmond here).

Here is a pic of a nice disco trayback that I found somewhere I can't remember.
You do not have the required permissions to view the files attached to this post.
John
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 16 guests