Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Gearbox Rebuild and Clutch Replacement

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 43
Joined: Sat May 28, 2005 3:33 pm
Location: Townsville QLD

GQ Gearbox Rebuild and Clutch Replacement

Post by Dicko1980 »

My gearbox is coming out tomorrow of my 94 GQ Coil Cab, 203 000kms to fix a gearbox noise that I am experiencing when the ute is idling in neutral. The box sounds like it is making a bearing noise, when depressing the clutch the noise stops. I'm hoping for a shagged input shaft bearing or clutch. The clutch was replaced on the ute at 160 000kms and has done little 4wding since then. If the box needs a kit put through it, how much dollars am I looking at and how much for a heavy duty clutch kit? The ute is now turboed


Cheers :P
Dicko1980
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

probalby cheaper to replace the box with another one with low kms

rebuilding your box will just cost too much i believe.

for clutch - i recommend direct clutch as they do a good kit.
Top
Posts: 535
Joined: Sat Feb 05, 2005 9:57 am
Location: Oakleigh, Victoria

Post by of4x4 »

Don't know about the box, but I just put an Exedy Safari Tuff Heavy Duty clutch into mine. Cost me $525 in Melbourne and I put it in myself - (bitch of a job - never do it again...!)

I assume that yours is diesel? (turbo'd so I assume so...). There seems to be a marked difference in price between petrol and diesel.
Top
Posts: 136
Joined: Sat Sep 04, 2004 9:40 am
Location: Wellington, NZ

Post by legsx1 »

Hey of4x4, can you give me the contact details of where you got your clutch, preferablly email address
worthog who likes to play in the mud, just follow me, if you can
Top
Posts: 325
Joined: Sun May 08, 2005 4:55 pm
Location: melbourne

Post by mudmav »

DITTO
andrewholmes
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

clutch i can do $650. as for gearbox tthe noise is the imput sharft rattling on the end of the main sharft. that rebuild is about 850 to do. or a low km box 450
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 43
Joined: Sat May 28, 2005 3:33 pm
Location: Townsville QLD

Post by Dicko1980 »

I was quoted to put a bearing kit through the box $1800, is this reasonable or am I getting burnt?
Dicko1980
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests