Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ARB steps to TJM bullbar 80 series
Moderators: toaddog, Elmo, DUDELUX
ARB steps to TJM bullbar 80 series
They look like diffrent heights at the bullbar. As anyone had any success with this. Other wise i just buy a new bar, but a shame as i already have a high mount winch bar on it already
Do you mean ARB steps/brushbars to mate up to a TJM bar? 
If you are handy with a welder you could cut and shut it yourself. If not, any fabricator or welder will be able to do this mod. I have seen it done with a sleeve at the bullbar end and brush bar slipped over and bolted.
Jeff
If you are handy with a welder you could cut and shut it yourself. If not, any fabricator or welder will be able to do this mod. I have seen it done with a sleeve at the bullbar end and brush bar slipped over and bolted.
Jeff
" Some days you are the bug; some days you are the wind screen"
Who is online
Users browsing this forum: No registered users and 2 guests