Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bored engine advice

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 25
Joined: Sat Dec 31, 2005 3:18 pm

Bored engine advice

Post by mongrol »

Hi folks,

I'm going to see this car tomorrow and have a query.

http://www.carsales.com.au/pls/carsales ... istance=25

The engine is apparantly the normal 1300cc bored out to 1600. This to me seems like quite a large bore for a small engine (but I'm not a mechanice). What are the risks involved with this? How much more does it stress the engine? Is there an issue with not getting replacement parts if it goes pop?

Any advice appreciated.
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

dfhf

Post by SiKiD_01 »

sounds like its got a 1.6L in it. maybe a 1.6 conversion?
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 25
Joined: Sat Dec 31, 2005 3:18 pm

Post by mongrol »

Um.. its the original 1300cc engine which has been bored out to 1600cc. I assume this means the block, head, mounts etc.. are all original. It just either has a wider bore, or a taller stroke.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I belive that Suziworx or similar sell a 1500cc Kit for the 1300 motor, as far as I am aware there is no way of making a 1.3 a 1.6 without spending mega$$ (would be WAY cheaper to install and enginer a 1.6)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

There is definately no way that its a 1.3 bored to a 1.6, as the cylider walls would be extremey thin, and the motor would be highly prone to overheating.

Ask for the engine builder's name and contact details so you can ask exactly what WAS done.
[url]www.twinstickoffroad.com[/url]
Top
Posts: 25
Joined: Sat Dec 31, 2005 3:18 pm

Post by mongrol »

Thanks for the replies. Goin to see it in an hour, will report back.
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

Yea mate according to that post, it seems to have a 'rebuilt 1600' in it.
Top
Posts: 25
Joined: Sat Dec 31, 2005 3:18 pm

Post by mongrol »

Hmm, bloke still insists its a bored out 1300 to 1600. After telling him that that couldn't be so we settled on not knowing what it was. Certainly looked like a standard 1300 unit so perhaps it had a 1500 kit or something on it. Dunno, either way I bought a different one instead. w00p!
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Should have checked the engine number. that says engine capacity. G13 or G16
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 19 guests