Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Any one know what size & thread is the wheel nuts??

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Any one know what size & thread is the wheel nuts??

Post by Ian Sharpe »

They seem to be 1/2 BSF almost.

Anyone know for sure, I need to rethread one
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I thought most wheel studs were M12, either 1.0 or 1.25. But I found my rear seatbelt mounts were UNF, so I won't be surprised if your Paj is imperial. :roll:

Good luck,

Scott
Top
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

i think they are m12 fine thread, but cant remember what pitch. probably 1.25.
cookie monster
99 GU Patrol Wagon 4.2td
Top
Posts: 124
Joined: Thu Jan 02, 2003 9:34 pm
Location: Tyers

wheel stud threads

Post by Pharb »

I'm sure they are M12 x 1.25. Just a common tap size I've got laying around here somewhere.
Peter H
NJ Pajero 2.8TDI
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Pajero are M12x1.5 pitch the same as most other jap 4x4, the exception is nissan with M12x1.25
Almost all seatbelts are 7/16 unf, the few exceptions are american cars and some holdens with M12x1.75 in the later ones and 1/2unf in the earlier ones, and HQ 's ?
J Top
Top
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Post by Ian Sharpe »

Ok thanks guys,

look like 12mm get the node, cheers
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Top
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

same as commodore
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests