Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
yeah, i searched, both on body mounts and body swap, got bored after getting to the 5th page of both with no results
does anyone know if the bodymounts of the NT vs WT zooks are different? can i put the body of an older NT zook onto my WT zook chassis?
i guess while i'm asking, does anyone know if the NSW laws say ya can't put an older body on a chassis, like u can't put an older engine into a vehicle?
cheers
___,,,,_('o')_,,,,____
part of the newy conspiracy...
a 1.0 litre body won't just bolt on to a 1.3, but the rest I have no idea.
Mind you, I haven't tried it, but was told by somebody who did do it, and mounts needed to be made/modded.
can't even remember who, it was a while ago.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
roc box wrote:the 1ltr doesnt have them just square rubber pads
U talking about the body bolt blocks or the body spacer blocks.
I have a NT and a WT. I know for sure the WT has the conical rubber blocks in between the bolts bolting the body in and also has the square blocks in between the body where the no bolts. Let me know if u need pics as i have a bare WT chassis at home.
Btw, as zooks only have the one body number, u could swap the body ova and then swap the vin plates and then they would not know. If the same colour even better but if not then just say you have repainted it.
Disregard this if u are going from a softtop to a hardtop.
cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s