Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Adjusting 1.6 EFI Idle?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 51
Joined: Sun Jan 30, 2005 12:27 pm

Adjusting 1.6 EFI Idle?

Post by mooks100 »

Just wodnering if this is at all possible. I have a vitara motor in my Sierra and it just seems as if it idles a little low after i've braked and standing at the lights . Seems fine when cold but usually idles low when warm.
Also, I've heard you can alter the power delivery by messing around with the dizzy. Can doing this give more torque at low revs?

Cheers
Posts: 311
Joined: Fri Nov 12, 2004 3:59 pm
Location: Sunshine Coast

Post by beally »

i have just the efi on a 1.3 but on the bottom of the return perch of the throttle cable there is a little phillips screw that changes the position it stops in, you ajust the idle with this.
Posts: 117
Joined: Thu May 26, 2005 1:41 pm
Location: Sydney

Post by kimclive »

The idle adjustment screw on a 16 valvle EFI Vitara is on the tope rear of the throttle body recessed about 10mm below the top.

Cheers

Clive
Posts: 826
Joined: Sun Nov 24, 2002 4:24 pm
Location: Brisbane

Post by 12uke »

The idle adjustment screw on a 16 valvle EFI Vitara is on the tope rear of the throttle body recessed about 10mm below the top.

Cheers

Clive
I thought that one was the air mixture
The Ratkrawler

Surgery will fix your ugliness but not your stupidity?
Posts: 311
Joined: Fri Nov 12, 2004 3:59 pm
Location: Sunshine Coast

Post by beally »

idle is just below it.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests