Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tacho on Deisel?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

Tacho on Deisel?

Post by the plough »

Where does the tacho gets it reading from on a deisel engine??
Top
Posts: 561
Joined: Sun Aug 01, 2004 5:34 pm
Location: Bundy...

Contact:
Contact toyotroop

Post by toyotroop »

You will have to tell us what diesel motor it is and what model it is first
Top
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

Post by the plough »

thought it was a generic thing!.....oh well
2.8 L series deisel i think 1990.
It works fine some times but seems to drop out until u hit a bump or something then it will work again..progressively gettin worse
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

some read from the injector pump & some read from the flywheel. I am not sure where else. these are the 2 places that I have experianced. The problem sounds more like a wiring problem or the tacho itself to me.
Top
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

Post by the plough »

it seems to me like a bad connection somewhere
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

I had the same problem on my 2L Diesel.

The sensor on the back of the fuel pump (between fuel pump and engine block, hardest thing to get to ever!) was stuffed. It slowly stopped working until I had no tacho.

I replaced it with a 2nd hand sensor that I was lucky to score from a Diesel Mechanic for cheap and all was fine again. If it is that sensor then they are hard to find as most want to sell them with the pump 2nd hand.

I have never priced a new one.

Not sure if the 2.8 has the same sensor though???
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

Post by r0ck_m0nkey »

midi73 wrote:some read from the injector pump & some read from the flywheel. I am not sure where else. these are the 2 places that I have experianced. The problem sounds more like a wiring problem or the tacho itself to me.
Not sure if any Toyotas do, but another place for diesels is off the alternator.
If God did not intend for us to eat animals, then why did he make them out of meat?
Top
Posts: 88
Joined: Wed Mar 09, 2005 10:39 am

Post by the plough »

havnt had a good chance to look at it but i know from memory that there are 3 wires from the injector pump and two are the fuel shut off thingy, so maybe the third wire goes to the tacho...will look this arv
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 103 guests