I have been able to track down a second hand complete PTO for the MQ. Is there anything I should be particually careful of when looking at it? How much are the worth usally? Is it possible to make it suit a 4sp box eventhough the output shaft is designed for a 5sp box?
Shannon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PTO winches - need info
Re: PTO winches - need info
MQ080 wrote:I have been able to track down a second hand complete PTO for the MQ. Is there anything I should be particually careful of when looking at it? How much are the worth usally? Is it possible to make it suit a 4sp box eventhough the output shaft is designed for a 5sp box?
Shannon
on the pto winches i have had experience with the difference was the gear that goes on the back of the gear box, as the shaft coming out has different splines for 4 & 5 speeds, australian tipping systems in bayswater still has the gears in stock new but the price maybe a bit expensive.
see ya mav
MQ080 wrote:I would like to go for the PTO option... but the problem being everytime the MQ is on the sligthtest incline oil leaks from the overflow pipe out the back of the engine.... & last time i checked the engine had to be going to power the winch... maybe pipe could be redirected....
which overflow pipe is that ???
see ya mav
: 
The Pto will fit ur mq box whether it is 4 spd or 5spd the pto box bolt on the side fo the gear box not on the back as some one said earlier.
Yes the gear boxs are different but it is the internal spline shaft of the main cogs no the cogs that the pto gears run on.
You will have to shorten on of the shafts by approx 110 mm as a 5 spd is 110mm futher back, thats easie though and cheap as to do.
Keep in mind all that i said is advice and nit gosple.
And all this is in ref to Mq patrols who's gearbox and transfer are all bolted together.
Hope this helps.
The Pto will fit ur mq box whether it is 4 spd or 5spd the pto box bolt on the side fo the gear box not on the back as some one said earlier.
Yes the gear boxs are different but it is the internal spline shaft of the main cogs no the cogs that the pto gears run on.
You will have to shorten on of the shafts by approx 110 mm as a 5 spd is 110mm futher back, thats easie though and cheap as to do.
Keep in mind all that i said is advice and nit gosple.
And all this is in ref to Mq patrols who's gearbox and transfer are all bolted together.
Hope this helps.
1994 GQ TD4.2 SAFARI TURBO
1"SUSP LIFT
1"SUSP LIFT
Who is online
Users browsing this forum: No registered users and 0 guests