Hi,
I bought (dismantled) a bullbar from a 60 series cruiser and I tried to put it in my 61 series cruiser. It appears to be different. The bullbar appears to have 6 bolt points where as my 61 series only has 4 bolt points (on the chasis to the bullbar). It is mounted and fits well using the 4 bolt points on the chasis to the bullbar. Is this right? or do I have to mount a bracket on to the chasis to acheive the 6 bolt points?
Thanks!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bullbar front mounts - 60 series
Moderators: toaddog, Elmo, DUDELUX
bullbar front mounts - 60 series
HJ61 1989 Sahara VX TD 4.0
What brand of bar is it?
All 60's came standard with a nbracket fitted to the outer edges of the chassis rails to strengthen the bumper/bullbar. Four bolts on the inside of the chassis and two on the strengthen brk.
All 60's came standard with a nbracket fitted to the outer edges of the chassis rails to strengthen the bumper/bullbar. Four bolts on the inside of the chassis and two on the strengthen brk.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
Doesnt affect the bar during 'normal' 4wding. A mate has gone without his for the last five years without a prob, and thats with a 9000lb winch fitted as well!
I had an offcut of an old project.....6mm angle. Welded a piece of flat to the bottom and bolted it up. No movement out of the bar, even when loading up the winch.
I had an offcut of an old project.....6mm angle. Welded a piece of flat to the bottom and bolted it up. No movement out of the bar, even when loading up the winch.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
Who is online
Users browsing this forum: No registered users and 119 guests