Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

At or MT what is better in high speed dirt?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 47
Joined: Thu Dec 23, 2004 10:15 pm
Location: St Kilda VIC

At or MT what is better in high speed dirt?

Post by cookiemonster »

What do you guys think? Are aggressive AT patterns (like the BFG and Cooper) better in high speed dirt than MT patterns?

Looking at doing abit of off road racing, hence the question.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Some of the "rally" treads I've seen are almost like the classic motocross "knobby" tyres - so I reckon the more aggressive the better.

Having said that, I think some specialist mud patterns (Boggers, Claws) have little lateral grip, so an all-round performer like the BFG/MTR/STT may be a better choice.

But I drive pretty conservatively, so I can't speak from experience. :lol:

Cheers,

Scott
Posts: 189
Joined: Sat Sep 11, 2004 9:40 pm
Location: Cairns, Nth QLD

Post by meiamaro »

try "offroad racing australia.com.au"
good site.
For off roading muds would bee a better bet,
as off roading needs abit more aggression to allow for diffrent and
rutted terrain,as apposed to rally style of road with its hard
packed fine gravel.
In say that,we could almost brake just as hard on gravel as if you
on bitumen,with the good tyres?

Cheers Ian.
GQ LWB TD42 Turbo,(ps.water does not compress.)
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

You can see from the site Ryano posted that there is a huge variation with terrain. 4 is like an AT whereas 1 is getting near some of the less aggressive MTs.

There is even a wider variation for rally tyres depending on terrain. Hard packed gravel, loose gravel, dirt, sand...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 32
Joined: Mon Sep 05, 2005 2:28 am
Location: Portugal

Post by BJ40 3B »

Just for reference, on the Dakar, almost everyone uses BF MT's.... and they drive fast, over every type of terrain: very soft sand and very hard terrain with lots of stones on the ground!
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

As an all-rounder at speed on dirt the muddy will nearly always crap on the AT.

Having said that, I had a set of Desert Duellers (got 'em cheap) on my Lada (got it cheap) years ago and they were fantastic when driven REALLY hard, but REALLY scary when not pushing hard.

Go the muddies, you won't be disappointed.
bru21 wrote:What happens in goat, stays in goat!
Posts: 522
Joined: Tue Aug 31, 2004 2:35 am
Location: Sydney

Post by mabsydney »

AJFeroza wrote:As an all-rounder at speed on dirt the muddy will nearly always crap on the AT.

Having said that, I had a set of Desert Duellers (got 'em cheap) on my Lada (got it cheap) years ago and they were fantastic when driven REALLY hard, but REALLY scary when not pushing hard.

Go the muddies, you won't be disappointed.
A Lada goes HARD??? :finger: :finger: :finger:
1989 Nissan Safari TD42 with stuff
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

Although i'd hardly consider them a mud terrain my MTR's perform better than any AT tyre on high speed dirt. My BFG AT's were no comparison.
Posts: 31
Joined: Fri Mar 03, 2006 7:51 pm
Location: qld

Post by ROCKRASH »

CookieMonster.
have used a set of MTR's for the last four years. The tyres have covered about 30000klms of mainly high speed (80kph) dirt fitted to a 79series. The ute is set up as a tourer and tows an offroad camper. All up the combo weighs 4200kg. The MTR's bite hard on firm gravel and firmly packed sandy loam. Since going to the MTR have never had a puncture or sidewall stake but have noticed that they have started to chip and cut. In my mind the MTR's are a mile in front for what i do. Can't say that i have noticed much of a difference in mud or soft sand comared to previous tyres i have used (BFG) The tyres are exposed to mainly cape york/ kimberly/ outback QLD roads. Would not even consider an AT for high speed gravel unless your bitumen transport stage klms far outweighed your race stages. Even then i don't know.
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Defintely not JT's :D :D :D

That said, I agree with the others: Muddys, but not with too tall a sidewalls if your'e going high speed around corners, which I suspect you will :D
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Post by blurredvision »

The choice would be between either BFG's.
When you go to an offroad race and most of the field are using them, their is a reason for this. Track record proves this.
Depending on the surface the choice would be if it is a bit loose go the MT, but otherwise go the AT to reduce the chance of a rock puncturing a tyre between the grip.
As far as overseas offroad racing goes (Dakar, Baja1000) they use a BFG Project, which has a kevlar sidewall and is tough as. I'm guessing that these are not in the price range though.
Posts: 47
Joined: Thu Dec 23, 2004 10:15 pm
Location: St Kilda VIC

Post by cookiemonster »

Thanks for the feedback guys!
Post Reply

Who is online

Users browsing this forum: No registered users and 144 guests