Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LAST CHANCE PEOPLE!!!

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 106
Joined: Thu Mar 31, 2005 8:07 am
Location: melbourne, victoria, Australia

LAST CHANCE PEOPLE!!!

Post by Chris F20 maniac »

this is you last chance everyone, my beloved F20 is going to the grave yard this weekend, as the new beast has arrived and the old must go :cry:

so its you last chance to let me know if you want anything off this car for parts, you could even take the whole thing for parts if you like.

so here it is.

1977 daihatsu F20, for parts of repair

CONDITION:
everything is good except for chassis which is bent, could be repaired i guess, just dont know exactly how much it would cost to fix.

REASON FOR SELLING:
to hard and expensive for me to repair.

PRICE AND PRICE CONDITIONS:
all parts avail and price negotiable.

- new 3 row radiator from aussie desert coolers - $250
- custom stainless steel snorkel - $120
-custom rear bar with led lights - $300
-2 in extended shackles - $100 (3 out of 4 are good)
-2 in body lift kit - $250
-12R 1600 motor - $300
-4spd box - $300
-a pair of WRX seats with sliding rails moded to fit daihatsu - $250
-2 chrome headlight rings - $20
-quarter panel mounted mirrors with chrome plated arms - $40

EXTRA INFO:
pm me for details and or pics on anything

LOCATION:
Melbourne, greensborough.
You do not have the required permissions to view the files attached to this post.
81' 2 door rangie 4.4l V8
ROCK 'N' ROLL AINT NOISE POLLUTION!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Excuse the dumb question... but the gearbox/transfer isn't the same as a F300 Feroza is it ? If its the same am interested.
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

no the box and transfer shouldnt be the same

cheers
elliot
Posts: 713
Joined: Sun Sep 11, 2005 4:54 pm
Location: Down at the pub

Post by Mudsierra »

I'd be interested, if those rims do fit on a feroza? or a zook?
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

I'd say them wheels and tyres were the first to go :lol:
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 106
Joined: Thu Mar 31, 2005 8:07 am
Location: melbourne, victoria, Australia

Post by Chris F20 maniac »

yep your right,

the wheels and tyres in those photo's are gone.
the car is sittin on a set of rims 15X7 that will fit a zook and the tyres are hankook all terrains, about a 28in tyre i think.

the WRX seats and the rear bar are still up for grabs.

if your after the whole car including seats and rear bar im asking $800 ono.

without em $400 for the whole car.

cheers
81' 2 door rangie 4.4l V8
ROCK 'N' ROLL AINT NOISE POLLUTION!
Posts: 11
Joined: Mon Jan 16, 2006 12:29 pm

Post by manual »

Mate - you weren't possibly running a smaller then stock steering wheel were you??

I am chasing a small wheel + boss kit - you got this or was your steering wheel a stock steering wheel??

Cheers
Posts: 106
Joined: Thu Mar 31, 2005 8:07 am
Location: melbourne, victoria, Australia

Post by Chris F20 maniac »

nah mate sorry, i was only runnin the stock bus driver wheel.

i was chasing the same thing before all of this happened!
81' 2 door rangie 4.4l V8
ROCK 'N' ROLL AINT NOISE POLLUTION!
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

If I was closer those WRX seats would be nice... :lol:
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests