Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IPF 900 WIRING IDENT!

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

IPF 900 WIRING IDENT!

Post by familybus »

i know theres the answer somewhere but im too lazy to look! theres two wires comin outa the lights one is black and the other is white with a black trace! black would obviously be earth correct? and also any diagrams with negative wiring to switch and high beam wiring stuff would be nice! :lol:
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

please! :lol:
Top
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

have a look here. there is info about wiring up lights that are negative switched.


http://www.outerlimits4x4.com/PHP_Modul ... highlight=
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

My factory IPF fuse holder melted running only 100watt globes. I ditched it all and ran my own setup. There switches are very nice though

Food for thought.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

i had a switch melt on my saftey beacon then when i took out the switch and joined the two wires i melted the fuse holder and thats when i found out it was because i was runing too much power through switch then fuse holder hence with a relay it fixes that prob!
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

i was using a complete ipf loom, relay and all. go figure.
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

It shouldnt matter with a globe dude... LED yes because they are diode... but in a globe it wont matter... pick a wire for active, and make sure the other is connected to chassis earth :D
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

sweet thanks Dj ill do it this weekend ! onya bud!
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests